Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 064023 - 7 <br />walls and elsewhere as required for corrosion resistance. Provide toothed-steel or lead expansion <br />sleeves for drilled-in-place anchors. <br />C. Adhesives, General: Do not use adhesives that contain urea formaldehyde. <br />D. VOC Limits for Installation Adhesives and Glues: Use installation adhesives that comply with the <br />following limits for VOC content when calculated according to 40 CFR 59, Subpart D (EPA <br />Method 24): <br />1. Wood Glues: 30 g/L. <br />2. Contact Adhesive: 250 g/L. <br />E. Adhesive for Bonding Plastic Laminate: woodworkers option <br />3. Adhesive for Bonding Edges: Hot-melt adhesive <br />2.4 FABRICATION, GENERAL <br />A. Interior Woodwork Grade: Unless otherwise indicated, provide Premium-grade interior woodwork <br />complying with referenced quality standard. <br />B. Wood Moisture Content: Comply with requirements of referenced quality standard for wood <br />moisture content in relation to ambient relative humidity during fabrication and in installation <br />areas. <br />C. Sand fire-retardant-treated wood lightly to remove raised grain on exposed surfaces before <br />fabrication. <br />D. Fabricate woodwork to dimensions, profiles, and details indicated. Ease edges to radius indicated <br />for the following: <br />1. Corners of Cabinets and Edges of Solid-Wood (Lumber) Members and Rails: 1/16 inch <br />(1.5 mm). <br />E. Complete fabrication, including assembly finishing, and hardware application, to maximum extent <br />possible before shipment to Project site. Disassemble components only as necessary for <br />shipment and installation. Where necessary for fitting at site, provide ample allowance for <br />scribing, trimming, and fitting. <br />1. Notify ID seven days in advance of the dates and times woodwork fabrication will be <br />complete. <br />F. Shop-cut openings to maximum extent possible to receive hardware, appliances, plumbing fixtures, <br />electrical work, and similar items. Locate openings accurately and use templates or roughing-in <br />diagrams to produce accurately sized and shaped openings. Sand edges of cutouts to remove <br />splinters and burrs. <br />1. Seal edges of openings in countertops with a coat of varnish. <br />G. Install glass to comply with applicable requirements in Division 08 Section "Glazing" and in <br />GANA's "Glazing Manual." For glass in wood frames, secure glass with removable stops. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2