Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 064023 - 3 <br />B. Installer Qualifications: Fabricator of products and/or Certified participant in AWI's Quality <br />Certification Program . <br />C. Source Limitations: Engage a qualified woodworking firm to assume undivided responsibility for <br />production of interior architectural woodwork with sequence-matched wood veneers and wood <br />doors with face veneers that are sequence matched with woodwork and transparent-finished <br />wood doors that are required to be of same species as woodwork. <br />D. Quality Standard: Unless otherwise indicated, comply with AWI's "Architectural Woodwork <br />Quality Standards" for grades of interior architectural woodwork indicated for construction, <br />finishes, installation, and other requirements. <br />1. Provide AWI Quality Certification Program labels and certificates indicating that <br />woodwork,( including installation), complies with requirements of grades specified. <br />E. Fire-Test-Response Characteristics: Where fire-retardant materials or products are indicated, <br />provide materials and products with specified fire-test-response characteristics as determined by <br />testing identical products per test method indicated by UL, ITS, or another testing and <br />inspecting agency acceptable to authorities having jurisdiction. Identify with appropriate <br />markings of applicable testing and inspecting agency in the form of separable paper label or, <br />where required by authorities having jurisdiction, imprint on surfaces of materials that will be <br />concealed from view after installation. <br />F. Mockups: Build mockups to verify selections made under sample submittals and to demonstrate <br />aesthetic effects and set quality standards for materials and execution. <br />G. Preinstallation Conference: Conduct conference at Project site to comply with requirements in <br />Division 01 Section "Project Management and Coordination." <br />1.6 DELIVERY, STORAGE, AND HANDLING <br />A. Do not deliver woodwork until painting and similar operations that could damage woodwork have <br />been completed in installation areas. If woodwork must be stored in other than installation <br />areas, store only in areas where environmental conditions comply with requirements specified <br />in "Project Conditions" Article. <br />1.7 PROJECT CONDITIONS <br />A. Environmental Limitations: Do not deliver or install woodwork until building is enclosed, wet <br />work is complete, and HVAC system is operating and maintaining temperature and relative <br />humidity at occupancy levels during the remainder of the construction period. <br />B. Environmental Limitations: Do not deliver or install woodwork until building is enclosed, wet <br />work is complete, and HVAC system is operating and maintaining temperature between 60 and <br />90 deg F (16 and 32 deg C) and relative humidity between 43 and 70 percent during the <br />remainder of the construction period. <br />C. Field Measurements: Where woodwork is indicated to fit to other construction, verify dimensions <br />of other construction by field measurements before fabrication, and indicate measurements on <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2