Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br />DOOR HARDWARE 087100 - 8 <br />2. Strikes for Mortise Locks and Latches: BHMA A156.13. <br />3. Strikes for Interconnected Locks and Latches: BHMA A156.12. <br />4. Strikes for Auxiliary Deadlocks: BHMA A156.5. <br />5. Flat-Lip Strikes: For locks with three-piece antifriction latchbolts, as recommended by <br />manufacturer. <br />6. Extra-Long-Lip Strikes: For locks used on frames with applied wood casing trim. <br />7. Aluminum-Frame Strike Box: Manufacturer's special strike box fabricated for aluminum <br />framing. <br />2.6 MECHANICAL LOCKS AND LATCHES <br />A. Lock Functions: Function numbers and descriptions indicated in door hardware sets comply with the <br />following: <br />1. Bored Locks: BHMA A156.2. <br />2. Mortise Locks: BHMA A156.13. <br />3. Interconnected Locks: BHMA A156.12. <br />B. Bored Locks: BHMA A156.2, Grade as scheduled. <br />1. Manufacturers: <br />a. Arrow USA; an ASSA ABLOY Group company (ARW). <br />b. Best Access Systems; Div. of The Stanley Works (BAS). <br />c. Cal-Royal Products, Inc. (CRP). <br />d. Corbin Russwin Architectural Hardware; an ASSA ABLOY Group company (CR). <br />e. Falcon Lock; an Ingersoll-Rand Company (FAL). <br />f. Marks USA (MKS). <br />g. Medeco Security Locks, Inc.; an ASSA ABLOY Group company (MED). <br />h. PDQ Manufacturing (PDQ). <br />i. SARGENT Manufacturing Company; an ASSA ABLOY Group company (SGT). <br />j. Schlage Commercial Lock Division; an Ingersoll-Rand Company (SCH). <br />k. Security Door Controls (SDC). <br />l. Weiser Lock; a Masco Company (WEI). <br />m. Yale Commercial Locks and Hardware; an ASSA ABLOY Group company (YAL). <br />n. Others specifically named in Hardware Schedule. <br /> <br />2.7 DOOR BOLTS <br />A. Bolt Throw: Comply with testing requirements for length of bolts required for labeled fire doors, and as <br />follows: <br />1. Half-Round Surface Bolts: Minimum 7/8-inch (22-mm) throw. <br />2. Interlocking Surface Bolts: Minimum 15/16-inch (24-mm) throw. <br />3. Fire-Rated Surface Bolts: Minimum 1-inch (25-mm) throw; listed and labeled for fire-rated <br />doors. <br />4. Dutch-Door Bolts: Minimum 3/4-inch (19-mm) throw. <br />5. Mortise Flush Bolts: Minimum 3/4-inch (19-mm) throw. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2