Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br />DOOR HARDWARE 087100 - 6 <br />2.2 HINGES, GENERAL <br />A. Quantity: Provide the following, unless otherwise indicated: <br />1. Two Hinges: For doors with heights up to 60 inches (1524 mm). <br />2. Three Hinges: For doors with heights 61 to 90 inches (1549 to 2286 mm). <br />3. Four Hinges: For doors with heights 91 to 120 inches (2311 to 3048 mm). <br />4. For doors with heights more than 120 inches (3048 mm), provide 4 hinges, plus 1 hinge for every <br />30 inches (750 mm) of door height greater than 120 inches (3048 mm). <br />B. Template Requirements: Except for hinges and pivots to be installed entirely (both leaves) into wood <br />doors and frames, provide only template-produced units. <br />C. Hinge Weight: Unless otherwise indicated, provide the following: <br />1. Interior Doors: Self closing hinges. <br />D. Hinge Base Metal: Unless otherwise indicated, provide the following: <br />1. Interior Hinges: Steel, with steel pin. <br />E. Hinge Options: Where indicated in door hardware sets or on Drawings: <br />1. Nonremovable Pins: Provide set screw in hinge barrel that, when tightened into a groove in hinge <br />pin, prevents removal of pin while door is closed; as indicated in hardware sets. <br />2. Corners: Square. <br />F. Fasteners: Comply with the following: <br />1. Machine Screws: For metal doors and frames. Install into drilled and tapped holes. <br />2. Wood Screws: For wood doors and frames. <br />3. Threaded-to-the-Head Wood Screws: For fire-rated wood doors. <br />4. Screws: Phillips; machine screws (drilled and tapped holes) for metal doors, wood screws for <br />wood doors and frames. Finish screw heads to match surface of hinges. <br />2.3 HINGES <br />A. Butts and Hinges: BHMA A156.1. <br />B. Template Hinge Dimensions: BHMA A156.7. <br />C. Manufacturers: <br />1. Baldwin Hardware Corporation (BH). <br />2. Bommer Industries, Inc. (BI). <br />3. Hager Companies (HAG). <br />4. McKinney Products Company; an ASSA ABLOY Group company (MCK). <br />5. Stanley Commercial Hardware; Div. of The Stanley Works (STH). <br />6. Others specifically named on Hardware Schedule. <br />2.4 SPRING HINGES <br />A. Self-Closing Hinges: BHMA A156.17. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2