Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />WOOD DOORS 081416 - 5 <br />1. Fabricate door and transom panels with full-width, solid-lumber[, rabbeted,] meeting <br />rails. Provide factory-installed spring bolts for concealed attachment into jambs of metal <br />door frames. <br />D. Openings: Cut and trim openings through doors in factory. <br />1. Light Openings: Trim openings with moldings of material and profile indicated. <br />2. Glazing: Factory install tempered frosted glazing in door indicated as glazed. <br />3. Louvers: Factory install louvers in prepared openings. <br />2.5 FACTORY FINISHING <br />A. General: Comply with referenced quality standard for factory finishing. Complete fabrication, <br />including fitting doors for openings and machining for hardware that is not surface applied, <br />before finishing. <br />1. Finish faces, all four edges, edges of cutouts, and mortises. Stains and fillers may be <br />omitted on edges of cutouts, and mortises. <br />B. Finish doors at factory. <br />C. Finish doors at factory that are indicated to receive transparent finish. Field finish doors <br />indicated to receive opaque finish. <br />D. Finish doors at factory where indicated in schedules or on Drawings as factory finished. <br />E. Transparent Finish: <br />1. Grade: Custom. <br />2. Finish: catalyzed polyurethane system. <br />3. Finish: TR-6 catalyzed polyurethane. <br />4. Staining: As selected by Architect from manufacturer's full range. <br />5. Effect: Open-grain finish. <br />6. Sheen: Satin. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine doors and installed door frames before hanging doors. <br />1. Verify that frames comply with indicated requirements for type, size, location, and swing <br />characteristics and have been installed with level heads and plumb jambs. <br />2. Reject doors with defects. <br />B. Proceed with installation only after unsatisfactory conditions have been corrected. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2