Orange County NC Website
Browse       Search
CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12, 2020 <br />308 WEST FRANKLIN, CHAPEL HILL, NC <br /> <br />HOLLOW METAL DOORS AND FRAMES 081113 - 7 <br />2. Reinforce doors and frames to receive nontemplated, mortised and surface-mounted door <br />hardware. <br />3. Comply with applicable requirements in ANSI/SDI A250.6 and ANSI/DHI A115 Series <br />specifications for preparation of hollow metal work for hardware. <br />4. Coordinate locations of conduit and wiring boxes for electrical connections with <br />Division 26 Sections. <br />F. Stops and Moldings: Provide stops and moldings around glazed lites where indicated. Form <br />corners of stops and moldings with butted or mitered hairline joints. <br />1. Single Glazed Lites: Provide fixed stops and moldings welded on secure side of hollow <br />metal work. <br />2. Multiple Glazed Lites: Provide fixed and removable stops and moldings so that each <br />glazed lite is capable of being removed independently. <br />3. Provide fixed frame moldings on outside of exterior and on secure side of interior doors <br />and frames. <br />4. Provide loose stops and moldings on inside of hollow metal work. <br />5. Coordinate rabbet width between fixed and removable stops with type of glazing and <br />type of installation indicated. <br />2.6 STEEL FINISHES <br />A. Prime Finish: Apply manufacturer's standard primer immediately after cleaning and pretreating. <br />1. Shop Primer: Manufacturer's standard, fast-curing, lead- and chromate-free primer <br />complying with ANSI/SDI A250.10 acceptance criteria; recommended by primer <br />manufacturer for substrate; compatible with substrate and field-applied coatings despite <br />prolonged exposure. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine substrates, areas, and conditions, with Installer present, for compliance with <br />requirements for installation tolerances and other conditions affecting performance of the Work. <br />B. Examine roughing-in for embedded and built-in anchors to verify actual locations before frame <br />installation. <br />C. For the record, prepare written report, endorsed by Installer, listing conditions detrimental to <br />performance of the Work. <br />D. Proceed with installation only after unsatisfactory conditions have been corrected. <br />DocuSign Envelope ID: 775B89AF-3514-4D9E-B148-2FDE4EFF16C2