2022-317-E-AMS-Siemens Industry-Replace existing fire alarm system at Motor Pool and tie into existing controls

Browse Search

Desigo® Fire Safety – Detectors and peripherals, perfectly connected. FV2025/FV2050FC2025/FC2050FC2005 1 2 2 3 4 5 1 Main board and operator unit – FCM901-U2 – FCM901-L2 (for Canada) 2 Housing – With back box, door, window – FH901-U2 black – FH901-R2 red FC2005 stand-alone control panel Main board and operator unit FCM901-U2 (FCM901-L2 for Canada) – Interface options for loops, NACs, relays, aux. power, communication bus, city tie/leased line module – System LCD display, LEDs, control buttons – Built in on-board DACT Order no.: S54433-B100-A1 Order no.: S54433-A7-A1 (for Canada) System operating units FC2005Expansion options FC901 Leased line/city tie module FCI2020-U1 – Same as FC922/FV924 – Requires separate Leased Line/City Tie Cable Order no.: S54400-A57-A1 Leased Line/city tie cable FCA901-U1 – Required for use with FCI2020-U1 with FC901 Order no.: S54433-C106-A1 Battery bracket FHA901-U1 – Secures batteries to meet seismic requirements Order no.: S54433-B107-A1 Remote peripheral module FCA2018-U1 – Interface to remote printers Order no.: S54400-A65-A1 PAL-1 – UL listed parallel printer Order no.: 500-692407 PAD-5 main board – Addressable NAC expander Order no.: S54339-A17-A1 PAD-5-CDC – PAD-5 address NAC expansion card – Conventional Detectors Card Order no.: S54339-A7-A1 PAD-5-CLSA – PAD-5 address NAC expansion card – NAC and Releasing Order no.: S54339-A6-A1 Housings FC2005 Housing FH901-U2 – Black Order no.: S54433-B103-A1 Housing FH901-R2 – Red Order no.: S54433-B103-A2 Trim kit FHA902-U1 – Black Order no.: S54433-B106-A1 Trim kit FHA902-R1 – Red Order no.: S54433-B106-A2 Universal Enclosure FTH2073-UA – For Annun. Order no.: S54433-A6-A1 Battery Housing FH2072-UA – For 18AH batteries Order no.: S54433-A5-A1 Fire control panel FC2005-U2 Fire system display FSD901-U2 LED Annunciator FT2008-R1 RS485 4 Kits FC2005 FC2005 Electronic Kit FC2005-U2 – Contains main board and operator unit FCM901-U2 and power supply (170 W) Order no.: S54433-C103-A1 FC2005 stand-alone network Remote peripheral module FCA2018-U1 PAL-1 PAD-5 main board PAD-5-CDC PAD-5-CLSA Devices Desigo Fire Safety S-Line Desigo Fire Safety C-Line Air Duct Housing I/O Module Manual Pull Station NACs – Are connected to automatic fire detectors that are not easily accessible or visible – Contain an indicator lamp unit with one or two LEDs which will light up when the connected detector triggers an alarm – Backward compatible with H-series detector – Same footprint as existing Siemens duct housings – Include optional remote test feature and indicator – New, improved features include easy installation, improved operating temperature range, and optional in-duct carbon monoxide (CO) detection Remote indicators Air duct housings Air duct housing with relays FDBZ492-HR Order no.: S54319-B23-A1 Optional water-tight enclosure NEMA 4X FDBZ-WT Order no.: S54319-B26-A1 Air duct housing FDBZ492 Order no.: S54319-B22-A1 Remote test lamp FDBZ492-RTL Order no.: S54319-S27-A1 Weather-proof enclosure NEMA 3R WP-2000 Order no.: 500-649714 Class X Intelligent Lamp, Ceiling Mount, Tri-Color LED with Built-In Isolator ILED-XC Order no.: S54370-B6-A1 Class X Intelligent Lamp, Wall Mount, Tri-Color LED with Built-In Isolator ILED-XW Order no.: S54370-B5-A1 Desigo® Fire Safety S-Line detectors with ASAtechnologyTM – Advanced multi-criteria fire detector utilizing optical, thermal, and optional CO sensor – Extreme immunity to deceptive phenomena while providing enhanced detection with the industry’s only No False Alarm Guarantee – Provide redundant optical and thermal sensors for extraordinary reliability – Comply with NFPA 76 (Telecommunication Standard) as a Very Early Warning Fire Detector (VEWFD) as a result of high-sensitivity alarm capabilities – Include a multi-purpose carbon monoxide (CO) life safety and fire detector – Selectable as a multi-criteria fire detector and/or a CO life safety gas detector – Environmentally friendly “green” detectors, as they are RoHS- compliant and replace the need for ionization detectors due to forward/backward light scattering technology – Provide multiple selectable temperature alarm thresholds, fixed and rate-of-rise – Provides optional supervisory temperature & CO (PPM) threshold capabilities. – Solution for standard applications with average risk and moderate potential for deceptive phenomena – Prevents false alarms thanks to intelligent algorithms – Thermal detector provides 7 selectable alarm thresholds, fixed and rate-of-rise. – Offer wide operating temperature & relative humidity (RH) range – “Green” detectors, as they are RoHS-compliant, meeting the standards regarding the restriction of the use of certain hazardous substances in electrical and electronic equipment Desigo® Fire Safety C-Line detectors Multi-criteria fire detector FDOT421 Order no.: S54320-F6-A1 Thermal (heat) detector FDT421 Order no.: S54320-F5-A1 Optical (photoelectric) smoke detector FDO421 Order no.: S54320-F4-A1 Multi-criteria fire detector FDOOT441 Order no.: S54320-F7-A1 Multi-criteria fire/CO detector FDOOTC441 Order no.: S54320-F8-A1 Compatible with bases belowCompatible with bases below Compatible with bases below Detector relay base DB2-HR Order no.: S54370-F12-A1 Detector base DB-11 Order no.: 500-094151 Detector base DB-11E Order no.: 500-094151E Audible base ABHW-4B Order no.: S54320-F13-A1 Ceiling mount remote lamp RL-HC Order no.: 500-033230 Wall mount remote lamp RL-HW Order no.: 500-033310 Audible base ABHW-4S, (520Hz) Order no.: S54320-F14-A1 – Are for immediate manual actuation of a fire alarm or an extinguishing process – Direct alarm actuation by pulling down locking lever – For indoor and outdoor applications – For surface- and recess-mounted feed lines in easily accessible places - XMS Series manual station pending ULC approval, HMS-SA and HMS-2S should be used for Canada Manual pull stations and accessories Single action manual pull station XMS-S Order no.: S54321-F7-A1 Dual action manual pull station XMS-D Order no.: S54321-F8-A1 Single action metal manual pull station XMS-M Order no.: S54321-F19-A1 – Intelligently connect independent, potential-free make-or-break contacts – Can be independently configured via a fire control panel for status or alarm messages – Input modules monitor devices responsible for alarm inputs and confirm signals or technical states etc. – Class X series I/O have built in isolation (replaces the need for HLIM’s) – Output modules control other equipment, such as door holders, fire dampers, smoke control systems, plant shutdown etc. – FDCIO422 provides 4 in / 4 out with Class A wiring and AC rated contacts Line modules Control point HCP Order no.: 500-034860 Conventional zone module HZM Order no.: 500-034850 Class X Intelligent Test Switch Wall Plate & Isolator TSM-1X Order no.: S54370-B7-A1 Input/output module FDCIO422 – 4 inputs, 4 outputs – Class A and B wiring Order no.: S54322-F4-A1 Class X Single Input Monitor Module with Relay & Built-In Isolator XTRI-R Order no.: S54370-B1-A1 Class X Dual Input Monitor Module with Built-In Isolator XTRI-D Order no.: S54370-B2-A1 Class X Single Input Monitor Module with Built-In Isolator XTRI-S Order no.: S54370-B3-A1 Class X Mini Input Monitor Module with Built-In Isolator XTRI-M Order no.: S54370-B4-A1 Note: Contact Siemens Tech support for compatible panels. 5 City tie – FCI2020-U1 – FCA901-U1 (cable) 4 Battery bracket – FHA901-U1 3 Power supply – FP2011-U1 170 W, 24 VDC Power supply (170 W) FP2011-U1 – Incl. connection cable Order no.: 500-450222 FT2008-U1/RI (with control) U1: Order no.: S54400-A143-A1 R1: Order no.: S54400-A144-A1 FT2018-U1/R1 (without control) U1: Order no.: S54433-A1-A1 R1: Order no.: S54433-A2-A1 FT2009-U1/R1 (with control) U1: Order no.: S54400-A145-A1 R1: Order no.: S54400-A146-A1 FT2019-U1/R1 (without control) U1: Order no.: S54433-A3-A R1: Order no.: S54433-A4-A1 Fire System Display FSD901 U3: Order no.: S54433-C102-A1 R3: Order no.: S54433-C102-A2 Note: U3 indicates black enclosure & R3 indicates red enclosure for both FSDs and FTs Other – Power Supply, Annunciators LED Annunciator No Control FT2019-U1 The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. All rights reserved. Printed in USA 153-SBT-574 (1/20) ©2020 Siemens Industry, Inc. Siemens Industry, Inc. 8 Fernwood Road Florham Park, NJ 07932 Tel (973) 593-2600 Fax (973) 593-6670 Desigo Fire Safety Compact Planning Tool usa.siemens.com/desigo-fire-safety Desigo Fire Safety is a comprehensive fire safety system for fast, reliable fire detection, as well as alarm signaling and control. It is designed to protect lives and assets and to prevent production losses, thereby safeguarding your company’s buildings and survival. Desigo not only defines the technological state of the art, but also offers a high level of flexibility and scalability, as well as compatibility with existing and future products. Desigo Fire Safety: innovation based on trusted experience SIE2019 Desigo Compact Plan Tool (f).indd 1 1/29/20 10:41 AM Page 4 of 13 DocuSign Envelope ID: 0B851B7C-2813-49D4-B491-016926532516