Orange County NC Website
Browse       Search
Revision Date 10.17.2018 <br />a. Doors with different face materials or veneer grain configurations on opposite sides of the door. <br />b. Doors that are improperly installed or do not swing freely. <br />c. Warp on doors less than 1-3/4” thick but larger than 3’-0” x 7’-0”. <br />d. Appliques on one face of the door only, creating an unbalanced condition. <br />e. Applied mouldings exceeding 3-1/2” wide or covering more than 25% of the door face. <br />6. This warranty does not cover doors with: <br />a. Cutouts for lights (lites) and/or louvers, any edge of which is nearer than 5” to any edge of the door. <br />b. Cutouts having less than 3-5/16” on non-rated & 20-minute fire doors, and less than 5” on 45-, 60-, and 90-minute fire <br />doors between adjacent cutouts for unit locks, closures, or other hardware cutouts on flush doors; and cutouts having less <br />than 1-1/2” on stile and rail doors and on non-rated SCL core flush doors. <br />7. Cracking of high pressure decorative laminate faced doors with openings cut by other than the manufacturer or its <br />authorized representative. Radius of 1/4” at corners of openings must be maintained. <br /> <br />8. Door accessories, supplied by the manufacturer, for a period exceeding one year. <br />9. Doors altered by others. <br />10. Normal wear and tear, including wear-through of the finish, or deterioration for reasons other than material and <br />workmanship of the door itself. <br />11. Incompatibility of hardware with a particular door construction. <br />12. Doors where self-tapping or combination metal/wood screws are used to attach surface-applied hardware. <br />13. Interior doors used in an exterior application. An exterior opening is defined as an opening that cannot be climate <br />controlled for temperature and/or humidity on both sides. <br />14. Acoustical doors requiring hardware other than standard locks and hinges. <br />15. In order not to induce warp or excessive deterioration of your door, avoid using dark stains or paints on the door surfaces <br />exposed to direct sunlight. Doors painted any dark color with exposure to sunlight will not be warranted. <br />16. Placement quantity or size of knots that are manufactured from any “knotty” species are not covered under the terms of <br />this warranty. <br />17. Supa Collection or EnVivo Collection Doors. <br /> <br />HANDLING, JOB FINISHING AND INSTALLATION INSTRUCTIONS <br />Refer to VT USEFUL JOBSITE brochure online at www.vtindustries.com/ujs. <br /> <br />NO OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARE MADE, INCLUDING, BUT NOT LIMITED <br />TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. UNDER NO <br />CIRCUMSTANCES SHALL VT BE LIABLE FOR ANY LOSS OR DAMAGE ARISING FROM THE PURCHASE, USE <br />OR INABILITY TO USE ITS PRODUCTS, OR FOR ANY SPECIAL PUNITIVE, INDIRECT, INCIDENTAL, OR <br />CONSEQUENTIAL DAMAGES. NO DEALER, DISTRIBUTOR, FABRICATOR, INSTALLER, AGENT OR EMPLOYEE <br />OF VT HAS THE AUTHORITY TO ADD TO OR MODIFY THE OBLIGATIONS OR LIMITATION OF THIS <br />WARRANTY. THIS WARRANTY SHALL BE INTERPRETED EXCLUSIVELY UNDER THE LAWS OF THE <br />STATE OF IOWA. VT RESERVES THE RIGHT TO REVISE OR TERMINATE THIS WARRANTY AT ANY <br />TIME. ONLY DOORS PURCHASED FROM THE EFFECTIVE DATE OF THIS WARRANTY THROUGH <br />THE DATE OF ANY REVISION OR TERMINATION OF THIS WARRANTY WILL BE COVERED BY THIS <br />WARRANTY. <br />Page ___ of ___ <br />DocuSign Envelope ID: 97A9508F-537F-4A89-96AD-A82F9ABD3708