Orange County NC Website
Browse       Search
1000 Industrial Park • Holstein, IA 51025 • 800.827.1615 • Fax 712.368.4111 • www.vtindustries.com/doors <br />AWS/WDMA CUSTOM/PREMIUM GRADE HEAVY DUTY DOOR* <br />ARTISTRY <br />VT Door Type <br />(Interior use only) <br />HERITAGE <br />VT Door Type <br />(Interior use only) <br />DOOR STANDARDS:DOOR FEATURES: <br />All dimensions are nominal before sanding, trimming and prefitting within industry standards. Specifications may be changed at manufac- <br />turer’s option. Prefit and stock sizes available. <br />WOOD VENEER, MILL OPTION, OR HPDL <br />BONDED PARTICLEBOARD CORE <br />5-PLY CONSTRUCTION <br />NON-RATED OR 20-45-MIN. POSITIVE PRESSURE <br />TOP RAIL: <br />SCL or Fire Composite for 45-min <br />VERTICAL STILES: <br />SCL with matching laminate or wood edge <br />CORE: <br />PC, ANSI A208.1, grade LD-2. 70% of door construction weight, composed of <br />pre-consumer recycled material <br />CROSSBANDS: <br />HDF, 20% of door construction weight, composed of pre-consumer <br />recycled material <br />FACES: <br />Wood veneer “A” grade, unless otherwise specified, Mill Option Paintable Surface or <br />HPDL - HGS <br />FINISHED THICKNESS: <br />1-3/4” (± 1/16”) <br />BOTTOM RAIL: <br />SCL or Fire Composite for 45-min. <br />PC5-0719 <br />Blocking Reinforcement Options*: <br />available at additional cost for <br />undercutting and specialized hardware. <br />Blocking recommended for Extra Heavy <br />Duty Doors using surface mounted <br />hardware. <br />Fire composite blocking may be <br />required by certain hardware.HB-1 HB-2 <br />Top Rail Bottom Rail <br />PC-5 <br />5502H • 5P02H • 404H • 4P04H <br />Consult VT for project specific LEED compliance documentation. FSC available by request. <br />LEED V4 Credit Assistance Available <br />MR - Building Life Cycle Impact Reduction - Option 4 <br />X <br />MR - BPDO Environmental Product Declarations - Option 1 <br />MR - BPDO Sourcing of Raw Materials - Option 2 <br />X <br />X <br />X <br />MR - BPDO - Material Ingredients - Option 1 <br />MR - Extraction / Manufacture Valuation Factor <br />X <br />EQ - Low-Emitting Materials X <br />• WDMA I.S. 1-A-2013 and AWS, Edition 2, Section 9 Quality Standards (Bonded Core). <br />• Top and bottom rails of door shall be factory sealed. <br />• Doors shall be clad in AWS/WDMA custom wood veneer “A” grade with minimum thick- <br />ness 1/42” before sanding, with Type 1 adhesive containing no added urea-formaldehyde. <br />Both domestic and exotic hardwood species available for transparent finish. Premium “AA” <br />grade wood veneer available by request. Mill option paintable surface for opaque finish door <br />construction will be 3-ply. HDF faces adhered to core material OR horizontal grade standard <br />high pressure decorative laminate, meeting or exceeding NEMA Standard LD3, Type HGS, with <br />Type 1 adhesive containing no added urea-formaldehyde. Standard colors and patterns may be <br />selected, or custom colors and patterns can be specified at additional cost. <br />• Positive pressure 20-minute Intertek/Warnock Hersey fire labels shall be available within size <br />and usage limitations. Fire-rated doors must use approved lite frames. UL 10C <br />• Cutouts for vision panels shall be made at the factory and shall be of sizes and locations as <br />indicated on the drawings. Factory finished wood glazing stops or beige powder coated metal <br />lite frames shall be furnished for lite openings unless otherwise specified. Metal lite frames <br />may be veneer-wrapped at additional cost. Louvers are prohibited in 20-minute fire doors. <br />• Cutouts for vision panels shall be made at the factory and shall be of sizes and locations as <br />indicated on drawings. See STC chart for lite sizes and glass requirements by STC rating. <br />• Hardware preparation: All cutouts for mortise hardware shall be made at the factory from <br />hardware manufacturer’s templates and approved shop drawings. <br />• Doors shall be individually poly-bagged for protection in transit and storage periods, and <br />shall be marked as per tag openings on shop drawings. <br />• Door bottoms, sweeps, thresholds, gasketing, lite kits and glass may be supplied by others <br />or VT. <br />Standard Finish Type: WDMA TR-8/AWS System 9 (UV Cured Acrylated <br />Polyurethane). Primed factory finish or opaque finish available (Veneer). <br />Woodgrains, Solid Colors, & patterns available (laminate). <br />Veneer / Laminate Match: Book match standard. Slip or random available <br />(Veneer) or Standard Horizontal Grade (HGS) <br />Veneer Face Assembly: Running match standard. Center or balanced <br />available. <br />Pairs and Sets: Pair match standard, set match available. <br />Doors/Transoms: Continuous match standard. End or no match available. <br />Vertical Edges: (Visible surface) Matching wood edge finished to match <br />the face. <br />Cutouts: 5” minimum distance from door edge and the minimum distance <br />between lite and lock cut out is 3-5/16 for 20-minute. <br />Standard Bevel: 1/8” in 2” or 3 degrees. <br />Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7.1, 2013 <br />Edition. Bottom clearance 3/4” max. (bottom of the door to top finish floor) <br />See NFPA-80 4.8.4.1, 2013 edition. <br />Security Rating: Class 40 (highest rating possible) <br />STC Rating: See STC chart for requirements. <br />Screw Holding: Refer to Customer Service Update #CS119F (www. <br />vtindustries.com/doors/csupdates). <br />Page 5 of 9 <br />blocking required per <br />specifications <br />provide AA grade per <br />specifications <br />Blocking will be <br />included where <br />required <br />Submitting AA grade <br />DocuSign Envelope ID: 97A9508F-537F-4A89-96AD-A82F9ABD3708