Orange County NC Website
Browse       Search
<br />077200.1 – ROOF ACCESSORIES <br /> <br />Project Manual for Whitted Building Roof Replacement <br />Orange County, Hillsborough, NC <br />Prepared by Atlas Engineering, Inc., 551-A Pylon Drive – Raleigh, NC 27606 <br />May 2022 <br /> <br />SECTION 077200 <br /> <br />ROOF ACCESSORIES <br /> <br />PART 1 GENERAL <br /> <br />1.01 WORK INCLUDED <br /> <br />A. Provide all labor, materials, equipment and supervision necessary for the design, fabrication and <br />installation of new roof hatch and installation of a non-penetrating railing, and other accessories as <br />specified herein and as required to provide properly functioning and watertight details as shown on <br />the drawings and specified in this section. <br /> <br />B. Provide all labor, materials, equipment and supervision necessary for the design, fabrication and <br />installation of new interior and exterior roof access ladders, and other accessories as specified <br />herein and as required to provide properly functioning details as shown on the drawings and <br />specified in this section. <br /> <br />1.02 QUALITY ASSURANCE <br /> <br />A. Use adequate numbers of skilled workmen who are thoroughly trained and experienced in the <br />necessary crafts and who are completely familiar with the specified requirements and the methods <br />needed for proper performance of the work in this section. <br /> <br />1.03 SUBMITTALS <br /> <br />A. Roof Hatch Components: <br />1. Submit product data, material descriptions, dimensions, profiles, and finishes of hatch <br />components. <br />2. Submit hatch warranty information. <br />3. Provide shop drawings coordinating location of components. The Contractor shall verify <br />existing field conditions. <br /> <br />B. Other Components: <br />1. Provide product data for non-penetrating railing and any other accessories not listed but <br />required for proper installation of the work. <br /> <br />C. Exterior Access Ladder: <br />1. Submit product data, material descriptions, dimensions, profiles, and finishes of ladder <br />components. <br />2. Provide shop drawings coordinating location of components. The Contractor shall verify <br />existing field conditions. <br /> <br />D. Interior Access Ladder: <br />1. Submit product data, material descriptions, dimensions, profiles, and finishes of ladder <br />components, and other components associated with the interior work as shown on the <br />design details. <br />DocuSign Envelope ID: 89558C18-938A-4BFF-B14A-A2214E8AA5DD