Orange County NC Website
Browse       Search
<br />075400.3 – THERMOPLASTIC SINGLE-PLY ROOF SYSTEM <br /> <br />Project Manual for Whitted Building Roof Replacement <br />Orange County, Hillsborough, NC <br />Prepared by Atlas Engineering, Inc., 551-A Pylon Drive – Raleigh, NC 27606 <br />May 2022 <br /> <br />prior to submittal to show actual intended installation and not be solely for the purpose of material <br />take-off or ordering. <br /> <br />F. Submit shop drawings showing detail, fabrication, and fastening devices for each condition <br />encountered. (This includes, but is not limited to: perimeter and corner zone dimensions, insulation <br />fastening patterns/adhesive patterns, general sheet layout, metal fabrication shapes, fastener types <br />and spacing, and other specific components, etc.) Due to site-specific conditions, some design details <br />may have non-standard conditions and standard manufacturer’s detail may not be applicable. Where <br />non-standard conditions are present provide specific confirmation of acceptability by the warranting <br />manufacturer. <br /> <br />G. Submit a sample copy of the membrane manufacturer’s warranty and contractor’s warranty. <br />Although the warranty may be a sample copy it should bear the project name and have any warranty <br />lengths and applicable riders marked in to confirm it meets the specified requirements. <br /> <br />1.04 DELIVERY, STORAGE, AND HANDLING <br /> <br />A. Deliver roofing materials, insulation, and accessories in manufacturer’s original protective <br />containers with labels intact and legible. Comply with manufacturer’s published instructions for <br />storage and handling. <br /> <br />B. Store materials in dry protected areas, on clean, raised platforms with securely anchored weather <br />protective coverings in accordance with Section 016000. <br /> <br />C. Store flammable products away from sparks or open flames. Gasoline and open flammable <br />materials shall be removed from the roof daily. <br /> <br />D. Store roofing materials within temperature and humidity ranges recommended by the prior to use <br />as recommended by the roof membrane system manufacturer. Protect material from freezing. <br /> <br />1.05 ENVIRONMENTAL REQUIREMENTS <br /> <br />A. Proceed with roofing work only when weather conditions comply with roof membrane system <br />manufacturer’s recommendations. Do not violate temperature limitations recommended by the <br />manufacturer. <br /> <br />1.06 WARRANTIES <br /> <br />A. Provide a Contractor’s Five (5) Year Warranty for work included in this project in accordance with <br />Section 014000 of these specifications. <br /> <br />B. Provide roof membrane system manufacturer’s twenty-year non-prorated, full system warranty <br />covering labor, materials and workmanship of the roofing system against leakage and material <br />defects. The warranty will extend for a period of twenty (20) years from the date of Final <br />Completion. <br /> <br />DocuSign Envelope ID: 89558C18-938A-4BFF-B14A-A2214E8AA5DD