|
ORANGE COUNTY 262726-2
<br />
<br />Emergency Management Warehouse Building Dehumidification Wiring Devices
<br />
<br />
<br />
<br />Receptacles: 1
<br /> 2
<br />General-Use Duplex: Provide duplex specification grade type receptacle, 2-pole, 3-wire, grounding, with 3
<br />green hexagonal equipment ground screw, high impact nylon face, ground terminal, brass triple wipe 4
<br />contacts, 20 Ampere rated, 125-volts, with metal plaster ears. Provide receptacles with grounding terminal 5
<br />internally connected to mounting yoke. Receptacles shall be designed for side and back wiring with spring-6
<br />loaded, screw activated pressure plates, with NEMA configuration 5-20R unless otherwise indicated. 7
<br /> 8
<br />General-Use Simplex: Provide single specification grade type receptacle, 2-pole, 3-wire, grounding, with 9
<br />green hexagonal equipment ground screw, high impact nylon face, ground terminal, brass triple wipe 10
<br />contacts, 20 Ampere rated, 125 volts, with metal plaster ears. Provide receptacles with grounding terminal 11
<br />internally connected to mounting yoke. Receptacles shall be designed for side and back wiring with spring-12
<br />loaded, screw activated pressure plates, with NEMA configuration 5-20R unless otherwise indicated. 13
<br /> 14
<br />Ground-Fault Interrupter: Provide specification grade ground-fault circuit interrupter, with heavy-duty duplex 15
<br />receptacles capable of being installed in a 1-1/2" deep outlet box without adapter. Ground fault interrupter 16
<br />receptacles shall be grounding type, UL Class A, Group 1, 20 ampere rated, 120-volts, 60 Hz, with high 17
<br />impact nylon face, brass triple wipe contacts, and solid-state ground-fault sensing and signaling. Devices 18
<br />shall have 5 milliamperes ground-fault trip level and shall be equipped with NEMA configuration 5-20R. 19
<br /> 20
<br />Special Receptacles: Provide special receptacles with NEMA configuration, voltage rating, current rating, 21
<br />and other attributes as indicated on the Drawings in Receptacle Schedules, General Notes, Keyed Notes, or 22
<br />other designations. 23
<br /> 24
<br />Receptacles provided are to be either straight blade, locking type, or pin type as indicated. All 25
<br />receptacles are to be equipped with green hexagonal equipment ground screw, brass triple wipe 26
<br />contacts and brass connector screws. 27
<br /> 28
<br />Receptacles shall be designed for both side and back wiring with spring-loaded and screw 29
<br />activated pressure plates where such are available in the device type indicated. 30
<br /> 31
<br />Miscellaneous Features: 32
<br /> 33
<br />Provide the following additional receptacle features where such is required by code or indicated on the 34
<br />drawings: 35
<br /> 36
<br />Weather resistant (WR) for all general use and ground fault interrupter receptacles installed in 37
<br />damp and wet locations. 38
<br /> 39
<br />Switches: 40
<br /> 41
<br />Snap: Provide heavy-duty, specification grade, flush single-pole AC quiet toggle switches, 20 Amperes, 42
<br />120-277 Volts AC, with silver cadmium oxide contacts, brass terminal screws, and mounting yoke insulated 43
<br />from mechanism. Equip switches with plaster ears, switch handle, and green hexagonal equipment 44
<br />grounding screw. Switches shall be designed for side and back wiring with spring-loaded, screw activated 45
<br />pressure plates. 46
<br /> 47
<br /> 48
<br />WIRING DEVICE ACCESSORIES 49
<br /> 50
<br />Wallplates for Flush Mounted Devices: Provide standard sized stainless steel (Type 302 wallplates for flush mounted 51
<br />single and combination wiring devices of types, sizes, and with ganging and cutouts as required for the application. 52
<br />Select plates that mate and match wiring devices to which attached; provide blank plates for empty or unused boxes. 53
<br />Provide screws for securing plates to devices; screw heads shall match finish of plates. Oversized plate shall not be 54
<br />used unless specifically permitted by the A-E. A quantity of 2% spare plates shall be provided for the Owner. 55
<br /> 56
<br />Wallplates for Surface Mounted Devices: Provide steel plates as required to match device box construction. 57
<br /> 58
<br />Wallplates for exterior and/or wet locations: Provide weatherproof PVC products listed as "extra duty while in use." 59
<br />Covers shall be rectangular, transparent high-impact, UV-resistant polycarbonate. 60
<br />61
<br />DocuSign Envelope ID: 7668B866-6C26-485C-9A45-DAAB5D4BD951
|