A fee of 3% will be added for all all Credit Card transactions
<br />Please Remit All Contracts, PO's and Payments To:
<br />TRI Solutions, Inc. 712 Summit Avenue, Kinston, NC 28501
<br />By signing this proposal; I acknowledge that I have read and accept the terms and conditions contained herein.
<br />Name_________________________________________________DATE___________________
<br />Proposal Valid for 30 Days Delivery to Job and Installation is included.
<br />You have three (3) days from the date of our agreement to cancel this order. If you wish to cancel after the 3 days you will be responsible to pay some or all of the total price.
<br />Materials are specific to each job application. A deposit is required prior to the scheduling of each project.
<br />Standard warranty offers a full (1) year warranty on materials and labor from date of purchase according to Terms and Conditions. Warranty will provide replacement of material and needed
<br />labor in the event that TRI Solutions Inc materials prove defective and provided materials are installed in strict compliance by Certified TRI Solutions Inc installation technicians. Samples are
<br />only representative of what will be installed in your project. Improperly cured or prepared subfloor which is specified in your new construction along with the subfloor being level, structurally
<br />sound, free of residual solvent(s), moisture free and fully cured is the responsibility of the General Contractor, Construction Company or the Project Superintendent. All services guaranteed as
<br />specified. All work to be completed in a workmanlike manner according to standard practices. Any alteration or deviation from this proposal involving extra costs will be executed only upon
<br />written orders and will become an extra charge over and above the proposal. All agreements contingent upon strikes, accidents or delays beyond our control. Owner to carry fire, tornado and
<br />other necessary insurance. Our workers are fully covered by Workman’s Compensation Insurance. Evidence of Insurance will be provided upon request. Any special requirements or
<br />endorsements may incur additional charges. We do not waive any rights of subrogation against the contractor or owner for any loss covered by insurance of any type. Notwithstanding the
<br />foregoing, in no event will TRI Solutions Inc be responsible for damages due to delays beyond TRI Solutions Inc’s reasonable control.
<br />TRI Solutions Inc warrants and guarantees that all materials and equipment furnished shall be new unless otherwise specified, and that all Work will be of the specified quality, free from faults or
<br />defects in materials or workmanship, and in accordance with requirements.
<br />All TRI Solutions Inc services require a minimum of 72 of cure time before they can be exposed to moisture. If this timeline is not adhered to the customer takes full responsibility for any
<br />damage or performance issues that may result. Epoxies chalk and yellow with age extended exposure to UV and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the
<br />use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting the adhesion of subsequent topcoats.
<br />TRI Solutions Inc will take all precautions to protect adjoining flooring, walls, materials etcetera from exposure to water and/or chemicals. Any damage that may occur from contact from water
<br />and/or chemical is not the responsibility of TRI Solutions Inc. or its staff.
<br />Pricing subject to change when additional cost and/or requirements need to be met on behalf of TRI Solutions for vendor approvals and/or project award.
<br />TRI Solutions Inc marketing will send periodic email communication informing you of various service offerings. At any time you wish to stop receiving this information you may opt-out from
<br />within the email received or contact our office.
<br />I hereby give TRI Solutions Inc. authorization to do the work specified and payment will be made as outlined above.
<br />Suspending Services for Non Payment. If the client, other than as allowed by the Contract or other than due to the fault of TRI Solutions Inc, fails to pay TRI Solutions Inc undisputed amounts
<br />due within thirty (30) days after the time that such amounts are due to be paid, TRI Solutions Inc may, upon seven (7) additional days’ written notice to the client, stop the Work until payment of
<br />such undisputed amount is paid. The Contract Time and Contract Sum shall be extended appropriately to reflect TRI Solutions Inc reasonable costs of shut-down, delay, and start-up.
<br />Standard of Care. It is agreed that TRI Solutions Inc expressly disclaims all express or implied warranties and guarantees with respect to the performance of professional services, and it is
<br />agreed that the quality of such services shall be judged solely as to whether TRI Solutions Inc performed its services consistent with the professional skill and care ordinarily provided by firms
<br />practicing in the same or similar locality under the same or similar circumstances (hereinafter the “Standard of Care”)
<br />Limitation of Damages. Neither party shall be liable to the other party for lost revenues, lost profits or other incidental, indirect, special, consequential, or exemplary damages in connection with
<br />this Agreement or performance hereunder, whether or not a party has been advised by the other party of the probability of such damage or loss, whether such damage or loss arises in contract,
<br />tort, including negligence, strict liability or otherwise. The Contractor, Owner, or End-users sole remedy under this Agreement for any Products, Services, or Labor that fail to conform to the
<br />applicable Specifications or otherwise for TRI Solutions breach of this Agreement shall be the repair or replacement of the Products, Services or a refund of the amount actually paid to TRI
<br />Solutions by Contractor, Owner, or End User for specific Product or Services provided. Claims for damages of any nature whatsoever pursued under this Agreement shall be limited to direct
<br />damages only up to the aggregate amount of contract disbursed as of the time the dispute arises.
<br />Limited Warranty
<br />Ultra Durable Floors warrants that, for a period of twelve (12) months, after application by Certified Contractor, the Products will (i) conform to industry standards, (ii) be fit for the purpose for
<br />which they were designed; (iii) meet the requirements of all applicable law.
<br />Any statements, representations, warranties, or advertisements made by a Certified Contractor concerning the products shall be its sole responsibility. This warranty does not include defects or
<br />nonconformity to the extent it is caused by misuse, mishandling, misapplication or modification by Certified Contractor.
<br />Warranted products include Epic gloss, Epic satin either with or without Epic Bond Promoter.
<br />Floor surfaces must be clean of any existing finishes, dirt, grease, grime, and any other contaminants. Surfaces must have a neutral ph at the time of application. Floor must also be completely
<br />dry. Moisture readings should be taken before and after the preparation process on porous floors (especially concrete and cement based terrazzo) to ensure that it is completely dry prior to an
<br />Epic application.
<br />Product must be installed within 60 days of the batch date listed on each Part A container. If product is more than 60 days past the batch date, contact your product supplier for a shelf life additive
<br />or to replace the product prior to use.
<br />Product contents must be inspected prior to application. Stir Part A prior to adding part B. Do not use if Part A has any hard settled material on the bottom of the bucket. Do not use part B if there
<br />is any crystallization or film on the surface of the product. Do not mix and use products that have leaked to ensure the ratios of A to B are correct.
<br />Always keep product stored at temperatures between 50 – 80 degrees. Ensure that all components are at room temperature (60-75 deg) prior to mixing and applying the product.
<br />Purchaser must notify Ultra Durable Floors of any claims within 14 days from the date when the purchaser becomes aware of any issues. Ultra Durable Floors will replace nonconforming or
<br />defective Products within thirty (30) days after notice thereof. Ultra Durable Floors will be responsible for the cost of replacement of such nonconforming or defective Products. Ultra Durable
<br />Floors and Certified Contractor will cooperate to conduct a failure analysis process to determine the cause of failure in the Products. There are no warranties which extend beyond those
<br />expressly stated heretofore.
<br />Exclusions
<br />The following are not covered by this warranty:
<br />• Scratching. It is highly recommended that Customer implement protective pads or urethane-tread casters on furniture and fixtures that may cause damage to floors.
<br />• Differences in appearance between Products and photographs or samples.
<br />• Indentation from improper loading including high heels, spiked shoes, rolling loads, dragging loads, chairs, equipment or other furniture not using floor protectors.
<br />• Discoloration or degradation due to improper use of chemical cleaners or mechanical cleaning procedures.
<br />There are no warranties which extend beyond those expressly stated heretofore.
<br />2
<br />DocuSign Envelope ID: C3002DBA-4BD7-42B8-8770-C7716BF90543
|