Orange County NC Website
Browse       Search
<br />High Rock Road Waste and Recycling Center Improvements 32 31 13- 2 <br />Orange County, North Carolina JULY 2021 <br />DAA PN: R00592-213N <br /> <br />PART 2 - PRODUCTS <br />2.1 CHAIN-LINK FENCE FABRIC <br />A. General: Height indicated on Drawings. Comply with ASTM A 392, <br />CLFMI CLF 2445, and requirements indicated below: <br />1. Steel Wire Fabric: Metallic-coated wire 9 gauge (0.148 inch diameter). <br />a. Mesh Size: 2- inches. <br />b. Metallic (Zinc) Coating: ASTM A 392, Type II. <br />2.2 INDUSTRIAL FENCE FRAMING <br />A. Posts and Rails: Comply with ASTM F 1043 for framing, ASTM F 1083 for <br />Group IC round pipe, and the following: <br />1. Group: IA, round steel pipe, Schedule 40. <br />2. Fence Height: 6 feet (1.83 m). <br />3. Strength Requirement: Heavy industrial according to ASTM F 1043. <br />4. Coating for Steel Framing: <br />a. Metallic coating. <br />2.3 TENSION WIRE <br />A. General: Provide horizontal tension wire at top and bottom of fence fabric. <br />B. Metallic-Coated Steel Wire: 0.177-inch- (4.5-mm-) diameter, marcelled tension <br />wire complying with ASTM A 817 and ASTM A 824. <br />1. Metallic Coating: Type III, Zn-5-Al-MM alloy. <br />2.4 INDUSTRIAL SWING GATES <br />A. General: Comply with ASTM F 900 for double swing gate types. <br />1. Metal Pipe and Tubing: Galvanized steel. Comply with ASTM F 1083 and <br />ASTM F 1043 for materials and protective coatings. <br />B. Frames and Bracing: Fabricate members from round, galvanized steel tubing <br />with outside dimension and weight according to ASTM F 900 and the following: <br />1. Gate Fabric Height: 2 inches (50 mm) less than adjacent fence height. <br />DocuSign Envelope ID: BBF56E0A-3618-497E-AA70-92F097E8F598