2022-029-E-AMS-Sasser Companies-Rogers Road Community Center Remediation

Browse Search

DocuSign Envelope ID:6A1278D6-4287-4002-98A9-C69C8C1D313E Indoor Environmental Air Quality Assessment • The Contractor acknowledges that he/she has acquainted him or herself with all conditions that may affect the work as would be evident from a thorough investigation of the job site and these specifications covering the work. • Should any error or inconsistency appear in the Specifications,the Contractor,before proceeding with the work,must make mention of the same to the project coordinator for proper adjustment, and in no case proceed with work in uncertainty. Remediation Contractor Responsibilities • The remediation contractor is responsible for the following: o Damage to property during the mold abatement procedures. o Failure to achieve a passing post-remediation verification(PRV)assessment. o Compliance with all federal, state and local codes as applicable to remediation activities to include holding permits as required by government entities. o Security of abatement equipment. o Communicating with the property owner/manager and obtaining permission for unusual requirements, such as but not limited to air discharge procedures, electrical requirements, temporary water, operations and/or storage areas, and requirements for access to the property. o Communicating with the property owner regarding concerns about lead-based paint and asbestos hazards(additional testing for lead/asbestos hazards may be required). o Staffing the project with full-sized crews. o Keeping an on-site folder containing the remediation procedures,route to a local hospital, project contacts with telephone numbers,Daily Field Activity Logs, and any other documents required for successful completion of the project. o Fire extinguishers to be set inside the containment area. o Signage. o The on-site supervisor identified by the Contractor will continue with the project until completion. o The Contractor must agree to the time schedule indicated by the property owner/manager that the property is available for abatement. o The Contractor must agree to the project documentation requirements identified in the Qualifications section of this Report. In addition,the Contractor should provide ESG with the qualifications of key personnel and any subcontractors,an example of daily log forms, a list of chemicals to be used with their MSDS sheets,confirmation of how waste will be packaged, decontaminated and disposed of,the Respiratory Protection and Health and Safety Plans, and proof of E&O Insurance that covers mold abatement activities. Health& Safety • The remediation contractor is responsible for the health and safety of remediation personnel and occupants of the building and is responsible for the following: • Providing appropriate personal protective equipment(PPE)to their employees. • Providing fire extinguishers inside the work area. • Providing an orientation for workers upon arrival to the site to discuss safety, security, egress, waste disposal, discretionary requirements, and decontamination procedures. • Posting of warning signs at entrances to the work area that only authorized personnel are to enter. Environmental Solutions Group • 7 Maple Leaf Drive,Ste 104, Greensboro, NC 27410 • 336-373-1538 30 www.Go-ESG.com