Orange County NC Website
Browse       Search
DocuSign Envelope ID:AD41 E8C7-FC41-4249-A9C6-849589FOC1 56 <br /> QUALITY CONTROL - 014500 <br /> PART GENERAL <br /> 1.01 REQUIREMENTS INCLUDED <br /> A. General quality assurance and control <br /> B. References <br /> C. Manufacturer's instructions, certificates, field services, and reports <br /> D. Testing laboratory services. <br /> 1.02 RELATED REQUIREMENTS <br /> A. Section 013300 Submittal Procedures <br /> 1.03 GENERAL QUALITY CONTROL <br /> A. Maintain quality control over suppliers, manufacturers, products, services, <br /> site conditions, and workmanship, to produce work of specified quality. <br /> B. Comply with industry standards except when more restrictive tolerances or <br /> specified requirements indicate more rigid standards or more precise <br /> workmanship. <br /> C. Perform work by persons qualified to produce workmanship of specified <br /> quality. <br /> D. Secure products in place with positive anchorage devices and sized to <br /> withstand stresses, vibration, physical distortion, and disfigurement. <br /> 1.04 REFERENCES <br /> A. Conform to the referenced standards and Standard Specifications. <br /> B. Specific provisions of codes, regulations and standards may be <br /> referenced in individual Specifications to assist the Contractor and identify <br /> options selected by the Engineer. Such references do not relieve the <br /> Contractor from compliance with other applicable provisions of codes, <br /> regulations, and standards not specifically referenced. <br /> C. Should specified reference standards conflict with Contract Documents, <br /> request clarification from Engineer before proceeding. <br /> 1.05 MANUFACTURER'S INSTRUCTIONS AND CERTIFICATES <br /> A. Comply with manufacturer's instructions in full detail, including each step <br /> in sequence. Should instructions conflict with Contract Documents, <br /> request clarification from Engineer before proceeding. <br /> B. When required by individual Specifications Section, submit manufacturer's <br /> certificate that products meet or exceed specified requirements. <br /> Orange County Waste and Recycling For Proposal — Not for Construction <br /> Metal and White Goods Retaining Wall Repair 01 45 00 - 1 <br /> DAA PN R00592-204ST2 November 2020 <br />