Orange County NC Website
Browse       Search
<br />0079200.5 – JOINT SEALANTS <br /> <br />Project Manual for Motor Pool Main Building Roof Replacement <br />Orange County, Hillsborough, NC <br />Prepared by Atlas Engineering, Inc., 551-A Pylon Drive – Raleigh, NC 27606 <br />August 2021 <br />3.04 CLEANING UP <br /> <br />A. Remove masking tape immediately after joints have been tooled. <br /> <br />B. Keep adjacent surfaces clean and free from sealant as the installation progresses. Use solvent or <br />cleaning agent as recommended by the sealant manufacturer. <br /> <br />C. Do not allow uncured sealants to contact surfaces adjacent to the joints, or any other non-joint <br />surfaces. If uncured sealants are introduced to prohibited areas, sealant shall be removed as follows: <br /> <br /> 1. Non-porous Surfaces - Immediately remove all excess sealant adjacent to the joint and <br />elsewhere by using an appropriate solvent or cleaner while sealant is still in uncured state. <br /> <br /> 2. Porous Surfaces - Allow sealant to develop initial cure, then remove by abrasion or other <br />mechanical means. Exercise extreme care to maintain the original surface texture without <br />damage. <br /> <br /> <br />END OF SECTION 079200 <br />DocuSign Envelope ID: 9514E4EC-C3C9-4752-8A7F-22E83B22BB8E