Orange County NC Website
Browse       Search
Construction Documents <br />20033 <br />Orange County Europa Center <br />21 1000 - 6 WATER-BASED <br />FIRE-SUPPRESSION SYSTEMS <br />1)Mechanical-T and -Cross Fittings: UL 213, ductile-iron housing with gaskets, <br />bolts and nuts, and threaded, or grooved outlets. <br />C.Sprinkler Drain and Alarm Test Fittings: Cast- or ductile-iron body; with threaded or locking-lug <br />inlet and outlet, test valve, and orifice and sight glass. <br />1.Manufacturers: <br />a.Central Sprinkler Corp. <br />b.Fire-End and Croker Corp. <br />c.Viking Corp. <br />d.Victaulic Co. of America. <br />D.Sprinkler Branch-Line Test Fittings: Brass body with threaded inlet, capped drain outlet, and <br />threaded outlet for sprinkler. <br />1.Manufacturers: <br />a.Elkhart Brass Mfg. Co., Inc. <br />b.Fire-End and Croker Corp. <br />c.Potter-Roemer; Fire-Protection Div. <br />E.Sprinkler Inspector's Test Fitting: Cast- or ductile-iron housing with threaded inlet and drain <br />outlet and sight glass. <br />1.Manufacturers: <br />a.AGF Manufacturing Co. <br />b.Central Sprinkler Corp. <br />c.G/J Innovations, Inc. <br />d.Triple R Specialty of Ajax, Inc. <br />2.Flexible Connectors <br />3.Flexible connectors shall have materials suitable for system fluid. Include 175-psig <br />(1200-kPa) minimum working-pressure rating and ends according to the following: <br />a.NPS 2 (DN 50) and Smaller: Threaded. <br />b.Manufacturers: <br />1)Anamet Inc. <br />2)Flex-Hose Co., Inc. <br />3)Flexicraft Industries. <br />4)Flex-Pression, Ltd. <br />5)Flex-Weld, Inc. <br />6)Hyspan Precision Products, Inc. <br />7)Mercer Rubber Co. <br />8)Metraflex, Inc. <br />9)Proco Products, Inc. <br />10)Unaflex Inc. <br />F.Stainless-Steel-Hose/Steel Pipe, Flexible Connectors: Corrugated, stainless-steel, inner tubing <br />covered with stainless-steel wire braid. Include steel nipples or flanges, welded to hose. <br />G.Stainless-Steel-Hose/Stainless-Steel Pipe, Flexible Connectors: Corrugated, stainless-steel, <br />inner tubing covered with stainless-steel wire braid. Include stainless-steel nipples or flanges, <br />welded to hose. <br />2.06 LISTED FIRE-PROTECTION VALVES <br />A.Valves shall be UL listed or FMG approved, with 175-psig (1200 kPa) minimum pressure rating. <br />Valves shall have minimum 300-psig (2070-kPa) pressure rating if valves are components of <br />high-pressure piping system. <br />B.Ball Valves: Comply with UL 1091, except with ball instead of disc. <br />1.NPS 1-1/2 (DN 40) and Smaller: Bronze body with threaded ends. <br />2.NPS 2 and NPS 2-1/2 (DN 50 and DN 65): Bronze body with threaded ends or ductile-iron <br />body with grooved ends. <br />3.NPS 3 (DN 80): Ductile-iron body with grooved ends. <br />4.Manufacturers: <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE