Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />RESILIENT BASE AND ACCESSORIES 09 65 13 - 5 <br />3.5 CLEANING AND PROTECTION <br />A. Comply with manufacturer's written instructions for cleaning and protection of resilient products. <br />B. Perform the following operations immediately after completing resilient product installation: <br />1. Remove adhesive and other blemishes from exposed surfaces. <br />2. Sweep and vacuum surfaces thoroughly. <br />3. Damp-mop surfaces to remove marks and soil. <br />C. Protect resilient products from mars, marks, indentations, and other damage from construction operations <br />and placement of equipment and fixtures during remainder of construction period. <br />1. Apply protective floor polish to resilient accessories that are free from soil, visible adhesive, and <br />surface blemishes. <br />2. Coordinate selection of floor polish with Owner's maintenance service. <br />3. Cover resilient accessories on floors and stairs with undyed, untreated building paper until <br />inspection for Final Acceptance. <br />D. Floor Polish: Remove soil, visible adhesive, and surface blemishes from resilient stair treads before <br />applying liquid floor polish. <br />1. Apply three coat(s). <br />E. Cover resilient products until Substantial Completion. <br />F. Clean products specified in this Section not more than 4 days prior to dates scheduled for inspections <br />intended to establish date of Final Acceptance in each area of Project. Clean products using method <br />recommended by manufacturer. <br />1. Strip protective floor polish that was applied after completing installation, prior to cleaning. <br />2. Reapply floor polish after cleaning. <br />END OF SECTION 09 65 13 <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE