Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br /> <br /> 06/16/20 08710 - 9 DOOR HARDWARE <br />2.09 DOOR STOPS AND HOLDERS <br />A. Manufacturers: <br />1. Scheduled Manufacturer: Ives. <br />2. Acceptable Manufacturers: Burns, ABH. <br />B. Provide door stops at each door leaf: <br />1. Provide wall stops wherever possible. Provide convex type where mortise type locks are used and <br />concave type where cylindrical type locks are used. <br />2. Where a wall stop cannot be used, provide medium duty surface mounted overhead stop. <br />3. Where wall or overhead stop cannot be used, provide universal floor stops for low or high rise <br />options <br />2.10 SILENCERS <br />A. Manufacturers: <br />1. Scheduled Manufacturer: Ives. <br />2. Acceptable Manufacturers: Steelcraft, Republic. <br />B. Requirements: <br />1. Provide "push-in" type silencers for hollow metal or wood frames. <br />2. Provide one silencer per 30 inches (762 mm) of height on each single frame, and two for each pair <br />frame. <br />3. Omit where gasketing is specified. <br />2.11 COAT HOOKS <br />A. Manufacturers: <br />1. Scheduled Manufacturer: Ives. <br />2. Acceptable Manufacturers: Burns, Trimco. <br />B. Provide coat hooks as specified. <br />2.12 FINISHES <br />A. Finish: BHMA 605/632 (US3). <br />PART 3 - EXECUTION <br />3.01 EXAMINATION <br />A. Prior to installation of hardware, examine doors and frames, with Installer present, for compliance with <br />requirements for installation tolerances, wall and floor construction, and other conditions affecting <br />performance. <br />B. Field verify existing doors and frames receiving new hardware and existing conditions receiving new <br />openings. Verify that new hardware is compatible with existing door and frame preparation and <br />existing conditions. <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE