Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />FLUSH WOOD DOORS 08 14 16 - 1 <br />SECTION 08 14 16 - FLUSH WOOD DOORS <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and <br />Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. Solid-core doors with wood-veneer faces. <br />2. Factory fitting flush wood doors to frames and factory machining for hardware. <br />B. Related Sections: <br />1. Division 08 Section "Glazing" for glass view panels in flush wood doors. <br />1.3 SUBMITTALS <br />A. Product Data: For each type of door indicated. Include details of core and edge construction, louvers, <br />and trim for openings. Include factory-finishing specifications. <br />B. Shop Drawings: Indicate location, size, and hand of each door; elevation of each kind of door; <br />construction details not covered in Product Data; location and extent of hardware blocking; and other <br />pertinent data. <br />1. Indicate dimensions and locations of mortises and holes for hardware. <br />2. Indicate dimensions and locations of cutouts. <br />3. Indicate requirements for veneer matching. <br />4. Indicate doors to be factory finished and finish requirements. <br />5. Indicate fire-protection ratings for fire-rated doors. <br />C. Samples for Initial Selection: For factory-finished doors <br />1. Veneer samples for doors with transparent finish. Provide three sets of veneer samples of the <br />species indicated, 12" x 12", showing the full range of color or grain variation anticipated. <br />a. Provide samples showing factory stain and factory transparent finish. <br />D. Samples for Verification: <br />1. Factory finishes applied to actual door face materials, approximately 8 by 10 inches, for each <br />material and finish. For each wood species and transparent finish, provide set of three samples <br />showing typical range of color and grain to be expected in the finished work. <br />2. Louver blade and frame sections, 6 inches long, for each material and finish specified. <br />3. Frames for light openings, 6 inches long, for each material, type, and finish required. <br />E. Warranty: Sample of special warranty. <br />1.4 QUALITY ASSURANCE <br />A. Source Limitations: Obtain flush wood doors from single manufacturer. <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE