Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 06 40 23 - 6 <br />3. Drawer Bottoms: Thermoset decorative panels. <br />I. Provide dust panels of 1/4-inch plywood or tempered hardboard above compartments and drawers, unless <br />located directly under tops. <br />2.7 PLASTIC-LAMINATE CABINETS <br />A. Grade: Custom. <br />B. AWS Type of Cabinet Construction: Flush overlay. <br />C. WI Construction Style: Style A, Frameless. <br />D. WI Construction Type: Type I, multiple self-supporting units rigidly joined together. <br />E. WI Door and Drawer Front Style: Flush overlay. <br />F. Reveal Dimension: 1/4 inch. <br />G. Laminate Cladding for Exposed Surfaces: High-pressure decorative laminate complying with the <br />following requirements: <br />1. Horizontal Surfaces Other Than Tops: Grade HGS. <br />2. Vertical Surfaces: Grade HGS. <br />3. Edges: PVC tape, 0.018-inch minimum thickness, matching laminate in color, pattern, and finish. <br />H. Materials for Semi exposed Surfaces: <br />1. Surfaces Other Than Drawer Bodies: High-pressure decorative laminate, Grade VGS. <br />a. Edges of Plastic-Laminate Shelves: PVC tape, 0.018-inch minimum thickness, matching <br />laminate in color, pattern, and finish. <br />b. For semi exposed backs of panels with exposed plastic-laminate surfaces, provide surface <br />of high-pressure decorative laminate, Grade VGS. <br />2. Drawer Sides and Backs: Solid-hardwood lumber with clear coat finish on sides of each surface. <br />3. Drawer Bottoms: Thermoset decorative panels. <br />I. Concealed Backs of Panels with Exposed Plastic Laminate Surfaces: High-pressure decorative laminate, <br />Grade BKL. <br />J. Colors, Patterns, and Finishes: Provide materials and products that result in colors and textures of <br />exposed laminate surfaces complying with the following requirements: <br />1. As selected by Architect from laminate manufacturer's full range in the following categories: <br />a. Solid colors, gloss and matte finish. <br />b. Solid colors with core same color as surface, gloss and matte finish. <br />c. Wood grains, gloss and matte finish. <br />d. Patterns, gloss and matte finish. <br />K. Provide dust panels of 1/4-inch plywood or tempered hardboard above compartments and drawers, unless <br />located directly under tops. <br />2.8 SOLID-SURFACING-MATERIAL COUNTERTOPS <br />A. Grade: Premium. <br />B. Solid-Surfacing-Material Thickness: 1/2 inch. <br />C. Colors, Patterns, and Finishes: Provide materials and products that result in colors of solid-surfacing <br />material complying with the following requirements: <br />1. As selected by Architect from manufacturer's full range. <br />D. Fabricate tops in one piece, unless otherwise indicated. Comply with solid-surfacing-material <br />manufacturer's written recommendations for adhesives, sealers, fabrication, and finishing. <br />1. Fabricate tops with shop-applied edges of materials and configuration indicated. <br />E. Install integral sink bowls in countertops in shop. <br />F. Drill holes in countertops for plumbing fittings. <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE