Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />INTERIOR ARCHITECTURAL WOODWORK 06 40 23 - 1 <br />SECTION 06 40 23 - INTERIOR ARCHITECTURAL WOODWORK <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and <br />Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. This Section includes the following: <br />1. Plastic-laminate cabinets and countertops. <br />2. Solid-surfacing-material countertops. <br />3. Shop finishing of interior woodwork. <br />B. Related Sections include the following: <br />1. Division 05 Section “Metal Fabrications” for perforated metal infill on casework. <br />2. Division 06 Section "Rough Carpentry" for wood furring, blocking, shims, and hanging strips <br />required for installing woodwork and concealed within other construction before woodwork <br />installation. <br />1.3 DEFINITIONS <br />A. Interior architectural woodwork includes wood furring, blocking, shims, and hanging strips for installing <br />woodwork items unless concealed within other construction before woodwork installation. <br />1.4 SUBMITTALS <br />A. Product Data: For each type of product indicated, including cabinet hardware and accessories handrail <br />brackets and finishing materials and processes. <br />B. Product Data: For panel products, high-pressure decorative laminate, adhesive for bonding plastic <br />laminate solid-surfacing material, cabinet hardware and finishing materials and processes. <br />C. Shop Drawings: Show location of each item, dimensioned plans and elevations, large-scale details, <br />attachment devices, and other components. <br />1. Show details full size. <br />2. Show locations and sizes of furring, blocking, and hanging strips, including concealed blocking <br />and reinforcement specified in other Sections. <br />3. Show locations and sizes of cutouts and holes for plumbing fixtures and other items installed in <br />architectural woodwork. <br />4. Show veneer leaves with dimensions, grain direction, exposed face, and identification numbers <br />indicating the flitch and sequence within the flitch for each leaf. <br />D. Samples for Initial Selection: <br />1. Shop-applied transparent finishes. <br />2. Plastic laminates. <br />3. PVC edge material. <br />4. Solid-surfacing materials. <br />E. Samples for Verification: <br />1. Lumber with or for transparent finish, not less than 50 sq. in., for each species and cut, finished on <br />1 side and 1 edge. <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE