Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />DEMONSTRATION AND TRAINING 01 79 00 - 2 <br />B. Instructor Qualifications: A factory-authorized service representative, complying with requirements in <br />Division 01 Section "Quality Requirements," experienced in operation and maintenance procedures and <br />training. <br />C. Photographer Qualifications: A professional photographer who is experienced photographing <br />construction projects. <br />D. Pre-instruction Conference: Conduct conference at Project site to comply with requirements in <br />Division 01 Section "Project Management and Coordination." Review methods and procedures related to <br />demonstration and training including, but not limited to, the following: <br />1. Inspect and discuss locations and other facilities required for instruction. <br />2. Review and finalize instruction schedule and verify availability of educational materials, <br />instructors' personnel, audiovisual equipment, and facilities needed to avoid delays. <br />3. Review required content of instruction. <br />4. For instruction that must occur outside, review weather and forecasted weather conditions and <br />procedures to follow if conditions are unfavorable. <br />1.5 COORDINATION <br />A. Coordinate instruction schedule with Owner's operations. Adjust schedule as required to minimize <br />disrupting Owner's operations. <br />B. Coordinate instructors, including providing notification of dates, times, length of instruction time, and <br />course content. <br />C. Coordinate content of training modules with content of approved emergency, operation, and maintenance <br />manuals. Do not submit instruction program until operation and maintenance data has been reviewed and <br />approved by Architect. <br />PART 2 - PRODUCTS <br />2.1 INSTRUCTION PROGRAM <br />A. Program Structure: Develop an instruction program that includes individual training modules for each <br />system and equipment not part of a system, as required by individual Specification Sections, and as <br />follows: <br />1. Motorized doors, including overhead doors. <br />2. Fire-protection systems, including fire alarm. <br />3. Intrusion detection systems. <br />4. Heat generation, including pumps and piping. <br />5. Refrigeration systems, including chillers, condensers, pumps and distribution piping. <br />6. HVAC systems, including air-handling equipment, air distribution systems and terminal <br />equipment and devices. <br />7. HVAC instrumentation and controls. <br />8. Electrical service and distribution, including transformers, switchboards, panelboards, <br />uninterruptible power supplies and motor controls. <br />9. Packaged engine generators, including transfer switches. <br />10. Lighting equipment and controls. <br />11. Communication systems, including intercommunication, surveillance, clocks and programming, <br />voice and data and television equipment. <br />B. Training Modules: Develop a learning objective and teaching outline for each module. Include a <br />description of specific skills and knowledge that participant is expected to master. For each module, <br />include instruction for the following: <br />1. Basis of System Design, Operational Requirements, and Criteria: Include the following: <br />a. System, subsystem, and equipment descriptions. <br />b. Performance and design criteria if Contractor are delegated design responsibility. <br />c. Operating standards. <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE