Orange County NC Website
Browse       Search
DSS Skills Development Center Smith Sinnett / 2020045 <br />Chapel Hill, North Carolina Orange County <br /> <br />QUALITY REQUIREMENTS 01 40 00 - 2 <br />F. Installer/Applicator/Erector: Contractor or another entity engaged by Contractor as an employee, <br />Subcontractor, or Sub-subcontractor, to perform a particular construction operation, including <br />installation, erection, application, and similar operations. <br />1. Using a term such as "carpentry" does not imply that certain construction activities must be <br />performed by accredited or unionized individuals of a corresponding generic name, such as <br />"carpenter." It also does not imply that requirements specified apply exclusively to tradespeople <br />of the corresponding generic name. <br />G. Experienced: When used with an entity, "experienced" means having successfully completed a minimum <br />of five previous projects similar in size and scope to this Project; being familiar with special requirements <br />indicated; and having complied with requirements of authorities having jurisdiction. <br />1.4 CONFLICTING REQUIREMENTS <br />A. General: If compliance with two or more standards is specified and the standards establish different or <br />conflicting requirements for minimum quantities or quality levels, comply with the most stringent <br />requirement. Refer uncertainties and requirements that are different, but apparently equal, to Architect <br />for a decision before proceeding. <br />B. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be the <br />minimum provided or performed. The actual installation may comply exactly with the minimum quantity <br />or quality specified, or it may exceed the minimum within reasonable limits. To comply with these <br />requirements, indicated numeric values are minimum or maximum, as appropriate, for the context of <br />requirements. Refer uncertainties to Architect for a decision before proceeding. <br />1.5 SUBMITTALS <br />A. Permits, Licenses, and Certificates: For Owner's records, submit copies of permits, licenses, <br />certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee payments, <br />judgments, correspondence, records, and similar documents, established for compliance with standards <br />and regulations bearing on performance of the Work. <br />1.6 QUALITY ASSURANCE <br />A. General: Qualifications paragraphs in this Article establish the minimum qualification levels required; <br />individual Specification Sections specify additional requirements. <br />B. Installer Qualifications: A firm or individual experienced in installing, erecting, or assembling work <br />similar in material, design, and extent to that indicated for this Project, whose work has resulted in <br />construction with a record of successful in-service performance. <br />C. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar to those <br />indicated for this Project and with a record of successful in-service performance, as well as sufficient <br />production capacity to produce required units. <br />D. Fabricator Qualifications: A firm experienced in producing products similar to those indicated for this <br />Project and with a record of successful in-service performance, as well as sufficient production capacity <br />to produce required units. <br />E. Professional Engineer Qualifications: A professional engineer who is legally qualified to practice in <br />jurisdiction where Project is located and who is experienced in providing engineering services of the kind <br />DocuSign Envelope ID: ECCAC5A0-6CC8-4B37-8AD3-89D69F0AE1AE