Orange County NC Website
Browse       Search
SHSC HVAC and Roof Replacement Smith Sinnett / 2020072 <br />Orange County, North Carolina <br /> <br />ROOF ACCESSORIES 07 72 00 - 4 <br />6. Sloping Roofs: Where slope of roof deck exceeds 1:48, fabricate curb units with water diverter or <br />cricket and with height tapered to match slope to level tops of units. <br />7. Roof curbs shall be designed for support for 139 Ultimate wind speed <br />2.5 EQUIPMENT SUPPORTS <br />A. Equipment Supports: Provide metal equipment supports, internally reinforced and capable of supporting <br />superimposed live and dead loads, including equipment loads and other construction to be supported. <br />Fabricate with welded or sealed mechanical corner joints, with integral metal cant and integral formed <br />mounting flange at perimeter bottom. Coordinate dimensions with rough-in information or Shop <br />Drawings of equipment to be supported. <br />1. Available Manufacturers: <br />a. Colony Custom Curbs. <br />b. Commodity Products Company, Inc. <br />c. Conn-Fab Sales, Inc. <br />d. Curbs Plus Inc. <br />e. Custom Curb, Inc. <br />f. LM Curbs. <br />g. Loren Cook Company. <br />h. Metallic Products Corporation. <br />i. Pate Company (The). <br />j. Roof Products & Systems Corporation. <br />k. Roof Products, Inc. <br />l. Thaler Metal Industries Ltd. <br />m. ThyCurb; Div. of Thybar Corporation. <br />n. Uni-Curb, Inc. <br />o. Vent Products Company, Inc. <br />2. Material: Galvanized steel sheet, 0.079 inch thick. <br />a. Finish: High-performance organic coating. <br />3. Factory-install continuous wood nailers 3-1/2 inches wide at tops of equipment supports. <br />4. Metal Counterflashing: Manufacturer's standard removable counterflashing, fabricated of same <br />metal and finish as equipment support. <br />5. Fabricate units to minimum height of 12 inches, unless otherwise indicated. <br />6. Sloping Roofs: Where slope of roof deck exceeds 1:48, fabricate curb units with water diverter or <br />cricket and with height tapered to match slope to level tops of units. <br />2.6 ROOF WALKWAYS <br />A. Rubber walkway mats where indicated compatible with roof membrane material. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine substrates, areas, and conditions, with Installer present, to verify actual locations, dimensions, <br />and other conditions affecting performance of work. <br />1. Verify that substrate is sound, dry, smooth, clean, sloped for drainage, and securely anchored and <br />is ready to receive roof accessories. <br />2. Verify dimensions of roof openings for roof accessories. <br />3. Proceed with installation only after unsatisfactory conditions have been corrected. <br />DocuSign Envelope ID: 94E7997D-4F29-42F6-A9B4-0A160438D2A6