Orange County NC Website
Browse       Search
SHSC HVAC and Roof Replacement Smith Sinnett / 2020072 <br />Orange County, North Carolina <br /> <br />ROOF ACCESSORIES 07 72 00 - 1 <br />SECTION 07 72 00 - ROOF ACCESSORIES <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and <br />Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. This Section includes the following: <br />1. Roof curbs. <br />2. Equipment supports. <br />3. Roof Walkway mats. <br />4. Preformed flashings. <br />B. Related Sections include the following: <br />1. Division 06 Section "Rough Carpentry" for roof sheathing, wood cants, and wood nailers. <br />2. Division 07 Section "Sheet Metal Flashing and Trim" for shop- and field-fabricated metal flashing <br />and counterflashing, roof expansion-joint covers, and miscellaneous sheet metal trim and <br />accessories. <br />1.3 SUBMITTALS <br />A. Product Data: For each type of roof accessory indicated. Include construction details, material <br />descriptions, dimensions of individual components and profiles, and finishes. <br />B. Shop Drawings: Show fabrication and installation details for roof accessories. Show layouts of roof <br />accessories including plans and elevations. Indicate dimensions, weights, loadings, required clearances, <br />method of field assembly, and components. Include plans, elevations, sections, details, and attachments <br />to other work. <br />C. Coordination Drawings: Roof plans, drawn to scale, and coordinating penetrations and roof-mounted <br />items. Show the following: <br />1. Size and location of roof accessories specified in this Section. <br />2. Method of attaching roof accessories to roof or building structure. <br />3. Other roof-mounted items including mechanical and electrical equipment, ductwork, piping, and <br />conduit. <br />D. Samples: For each type of exposed factory-applied finish required and for each type of roof accessory <br />indicated, prepared on Samples of size to adequately show color. <br />E. Warranty: Special warranty specified in this Section. <br />F. Engineered Drawings: Provide engineered data for the roof curb for the wind zone specified. <br />1.4 QUALITY ASSURANCE <br />A. Sheet Metal Standard: Comply with SMACNA's "Architectural Sheet Metal Manual" details for <br />fabrication of units, including flanges and cap flashing to coordinate with type of roofing indicated. <br />DocuSign Envelope ID: 94E7997D-4F29-42F6-A9B4-0A160438D2A6