Orange County NC Website
Browse       Search
SECTION 017300 - EXECUTION <br />Orange County DAA PN: R00592-226N <br />C&D Landfill Phase 2 Construction April 2021 <br /> 017300 - 2/9 <br />B. Weigh Receipts: Submit copy of receipts issued by a landfill or disposal facility, licensed to <br />accept materials for disposal. <br />1.6 QUALITY ASSURANCE <br />A. Land Surveyor Qualifications: A professional land surveyor who is legally qualified to practice in <br />jurisdiction where Project is located and who is experienced in providing land-surveying <br />services of the kind indicated. <br />B. Cutting and Patching: Comply with requirements for and limitations on cutting and patching of <br />construction elements. <br />1. Structural Elements: When cutting and patching structural elements, or when <br />encountering the need for cutting and patching of elements whose structural function is <br />not known, notify Engineer of locations and details of cutting and await directions from <br />Engineer before proceeding. Shore, brace, and support structural elements during <br />cutting and patching. Do not cut and patch structural elements in a manner that could <br />change their load-carrying capacity or increase deflection. <br />2. Operational Elements: Do not cut and patch operating elements and related <br />components in a manner that results in reducing their capacity to perform as intended <br />or that results in increased maintenance or decreased operational life or safety <br />3. Other Construction Elements: Do not cut and patch other construction elements or <br />components in a manner that could change their load-carrying capacity, that results in <br />reducing their capacity to perform as intended, or that results in increased maintenance <br />or decreased operational life or safety. <br />4. Visual Elements: Do not cut and patch construction in a manner that results in visual <br />evidence of cutting and patching. Do not cut and patch exposed construction in a <br />manner that would, in Engineer's opinion, reduce aesthetic qualities. Remove and <br />replace construction that has been cut and patched in a visually unsatisfactory manner. <br />C. Manufacturer's Installation Instructions: Obtain and maintain on-site manufacturer's written <br />recommendations and instructions for installation of specified products and equipment. <br />PART 2 - PRODUCTS <br />2.1 MATERIALS <br />A. Comply with requirements specified in other Sections. <br />1. For projects requiring compliance with sustainable design and construction practices <br />and procedures, use products for patching that comply with sustainable design <br />requirements. <br />B. In-Place Materials: Use materials for patching identical to in-place materials. For exposed <br />surfaces, use materials that visually match in-place adjacent surfaces to the fullest extent <br />possible. <br />DocuSign Envelope ID: 0844D1D6-E311-4FC5-8B5B-BB1E27A908ED