Orange County NC Website
Browse       Search
<br />Orange County DAA PN: R00592-226N <br />C&D Landfill Phase 2 Construction April 2021 <br /> 014500 - 1/2 <br />SECTION 014500 – QUALITY CONTROL <br />PART 1 GENERAL <br />1.1 REQUIREMENTS INCLUDED <br />A. General quality assurance and control <br />B. References <br />C. Manufacturer's instructions, certificates, field services, and reports <br />D. Testing laboratory services. <br />1.2 RELATED REQUIREMENTS <br />A. Section 013300 - Submittal Procedures <br />1.3 GENERAL QUALITY CONTROL <br />A. Maintain quality control over suppliers, manufacturers, products, services, site <br />conditions, and workmanship, to produce work of specified quality. <br />B. Comply with industry standards except when more restrictive tolerances or specified <br />requirements indicate more rigid standards or more precise workmanship. <br />C. Perform work by persons qualified to produce workmanship of specified quality. <br />D. Secure products in place with positive anchorage devices and sized to withstand <br />stresses, vibration, physical distortion, and disfigurement. <br />1.4 REFERENCES <br />A. Conform to the referenced standards and Standard Specifications. <br />B. Specific provisions of codes, regulations and standards may be referenced in individual <br />Specifications to assist the Contractor and identify options selected by the Engineer. <br />Such references do not relieve the Contractor from compliance with other applicable <br />provisions of codes, regulations, and standards not specifically referenced. <br />C. Should specified reference standards conflict with Contract Documents, request <br />clarification from Engineer before proceeding. <br />1.5 MANUFACTURER’S INSTRUCTIONS AND CERTIFICATES <br />A. Comply with manufacturer's instructions in full detail, including each step in sequence. <br />Should instructions conflict with Contract Documents, request clarification from <br />Engineer before proceeding. <br />B. When required by individual Specifications Section, submit manufacturer's certificate <br />that products meet or exceed specified requirements <br />DocuSign Envelope ID: 0844D1D6-E311-4FC5-8B5B-BB1E27A908ED