Orange County NC Website
Construction Documents <br />20052.02 / Orange County - Justice <br />Facility <br />26 0529 - 1 HANGERS AND SUPPORTS FOR <br />ELECTRICAL SYSTEMS <br />SECTION 26 0529 <br />HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS <br />PART 2 PRODUCTS <br />1.01 SUPPORT AND ATTACHMENT COMPONENTS <br />A.General Requirements: <br />1.Provide all required hangers, supports, anchors, fasteners, fittings, accessories, and <br />hardware as necessary for the complete installation of electrical work. <br />2.Provide products listed, classified, and labeled as suitable for the purpose intended, where <br />applicable. <br />3.Where support and attachment component types and sizes are not indicated, select in <br />accordance with manufacturer's application criteria as required for the load to be <br />supported with a minimum safety factor of _____. Include consideration for vibration, <br />equipment operation, and shock loads where applicable. <br />4.Do not use products for applications other than as permitted by NFPA 70 and product <br />listing. <br />5.Steel Components: Use corrosion resistant materials suitable for the environment where <br />installed. <br />a.Zinc-Plated Steel: Electroplated in accordance with ASTM B633. <br />b.Galvanized Steel: Hot-dip galvanized after fabrication in accordance with ASTM <br />A123/A123M or ASTM A153/A153M. <br />B. Conduit and Cable Supports: Straps, clamps, etc. suitable for the conduit or cable to be <br />supported. <br />1. Conduit Straps: One-hole or two-hole type; steel or malleable iron. <br />2. Conduit Clamps: Bolted type unless otherwise indicated. <br />C. Outlet Box Supports: Hangers, brackets, etc. suitable for the boxes to be supported. <br />D. Metal Channel (Strut) Framing Systems: Factory-fabricated continuous-slot metal channel <br />(strut) and associated fittings, accessories, and hardware required for field-assembly of <br />supports. <br />1. Comply with MFMA-4. <br />E. Hanger Rods: Threaded zinc-plated steel unless otherwise indicated. <br />F. Anchors and Fasteners: <br />1. Unless otherwise indicated and where not otherwise restricted, use the anchor and <br />fastener types indicated for the specified applications. <br />END OF SECTION 26 0529 <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392