Orange County NC Website
Browse       Search
Construction Documents <br />20052.02 / Orange County - Justice <br />Facility <br />26 0519 - 1 POWER CONDUCTORS AND <br />CABLES <br />SECTION 26 0519 <br />POWER CONDUCTORS AND CABLES <br />PART 1 GENERAL <br />1.01 SECTION INCLUDES <br />A.Single conductor building wire. <br />B.Underground feeder and branch-circuit cable. <br />C.Service entrance cable. <br />D.Wiring connectors. <br />E.Electrical tape. <br />F.Oxide inhibiting compound. <br />G.Wire pulling lubricant. <br />H.Cable ties. <br />1.02 RELATED REQUIREMENTS <br />A.Section 26 0553 - Identification for Electrical Systems: Identification products and <br />requirements. <br />1.03 REFERENCE STANDARDS <br />A.ASTM B3 - Standard Specification for Soft or Annealed Copper Wire; 2013. <br />B.ASTM B8 - Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, <br />Medium-Hard, or Soft; 2011 (Reapproved 2017). <br />C.ASTM B33 - Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical <br />Purposes; 2010 (Reapproved 2014). <br />D.ASTM B787/B787M - Standard Specification for 19 Wire Combination Unilay-Stranded Copper <br />Conductors for Subsequent Insulation; 2004 (Reapproved 2014). <br />E.NFPA 70 - National Electrical Code; National Fire Protection Association, Including All <br />Applicable Amendments and Supplements; 2017. <br />1.04 SUBMITTALS <br />A.Product Data: Provide manufacturer's standard catalog pages and data sheets for conductors <br />and cables, including detailed information on materials, construction, ratings, listings, and <br />available sizes, configurations, and stranding. <br />B.Field Quality Control Test Reports. <br />C.Manufacturer's Installation Instructions: Indicate application conditions and limitations of use <br />stipulated by product testing agency. Include instructions for storage, handling, protection, <br />examination, preparation, and installation of product. <br />D.Project Record Documents: Record actual installed circuiting arrangements. Record actual <br />routing of exterior below grade conduit and associated hand holes or man holes.. <br />E.Maintenance Materials: Furnish the following for Owner's use in maintenance of project. <br />1.05 QUALITY ASSURANCE <br />A.Comply with requirements of NFPA 70. <br />B.Manufacturer Qualifications: Company specializing in manufacturing the products specified in <br />this section with minimum five years documented experience. <br />C.Product Listing Organization Qualifications: Third party agencies shall be amongst those <br />accredited by the NCBCC (North Carolina Building Code Council) to label Electrical and <br />Mechanical Equipment. <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392