Orange County NC Website
Browse       Search
Orange County Facility Renovations <br />Hillsborough, NC <br /> <br />Smith Sinnett PAINTING <br />2020046/2020047/2020048/2020049/2020055 09 91 00 - 5 <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. Gloss Enamel: Weather-resistant, high-gloss enamel: <br />a. Glidden - “ICI” 4216-XXXX Devlex Acrylic Enamel. <br />b. Sherwin-Williams- DTM Acrylic Gloss B66 Series. <br />c. Approved equal by BM, MAB, PPG. <br />C. Products: Subject to compliance with requirements, provide one of the following: <br />1. Latex Systems: Low Sheen Finish for Existing Exterior Metal: <br />a. Sherwin-Williams- Pro Industrial Pro-Cryl Primer B66-310 Series & Bond-Plex <br />Waterbased Acrylic B71-200 Serie s. <br />b. Approved equal by Glidden, BM, MAB, PPG. <br /> <br />2.7 INTERIOR FINISH PAINT MATERIAL <br /> <br />A. Finish Paint: Provide the manufacturer's recommended factory-formulated finish-coat materials that <br />are compatible with the substrate and undercoats indicated. <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. Interior, Semigloss and Satin acrylic latex <br />a. Glidden - “ICI” Ultrahide-1412XXXX Dulux Professional Eggshell interior wall and <br />trim enamel. <br />b. Sherwin-Williams- ProGreen 200 Egg-Shell, B20-600 Series. <br />c. Sherwin-Williams- ProGreen 200 Semi-Gloss, B31-600 Series. <br />d. Approved equal by BM, MAB, PPG. <br />2.8 MISCELLANEOUS WOOD-FINISHING MATERIALS <br /> <br />A. Wood-Finishing Materials: Provide the manufacturer's recommended factory-formulated, wood- <br />finishing materials that are compatible with the substrate and undercoats indicated. <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. Oil-Type Interior Wood Stain: Slow-penetrating, oil-type wood stain. <br />a. Glidden – “ICI” 1700-XXX Woodpride interior solventborne wood finishing stain. <br />b. Sherwin-Williams- WoodClassics 250 VOC Oil Stain, A49-200. <br />c. Approved equal by BM, MAB, PPG. <br />2. Interior Polyurethane clear satin varnish. <br />a. Glidden - “ICI” 1902-0000 Woodpride interior satin polyurethane varnish <br />b. Sherwin-Williams- WoodClassics Waterborne Polyurethane, A68 Series. <br />c. Approved Equal BM, MAB, PPG. <br /> <br /> <br />PART 3 - EXECUTION <br /> <br /> <br />3.1 EXAMINATION <br /> <br />A. Examine substrates and conditions under which painting will be performed for compliance with paint <br />application requirements. Surfaces receiving paint must be thoroughly dry before paint is applied. <br />1. Do not begin to apply paint until unsatisfactory conditions have been corrected. <br />2. Start of painting will be construed as the Applicator's acceptance of surfaces and conditions <br />within a particular area. <br />B. Coordination of Work: Review other Sections in which primers are provided to ensure compatibility of <br />the total system for various substrates. On request, furnish information on characteristics of finish <br />materials to ensure use of compatible primers. <br />1. Notify the Architect about anticipated problems using the materials specified over substrates <br />primed by others. <br /> <br /> <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392