Orange County NC Website
Browse       Search
Orange County Facility Renovations <br />Hillsborough, NC <br /> <br />Smith Sinnett PAINTING <br />2020046/2020047/2020048/2020049/2020055 09 91 00 - 4 <br />1. Proprietary Names: Use of manufacturer's proprietary product names to designate colors or <br />materials is not intended to imply that products named are required to be used to the exclusion <br />of equivalent products of other manufacturers. Furnish the manufacturer's material data and <br />certificates of performance for proposed substitutions. <br />C. Colors: Provide color selections made by the Architect from the manufacturer's full range of standard <br />colors. <br />1. No cost increase will be considered due to the final color selected. This includes but not limited <br />to dark or intense hue and/or saturation colors. <br /> <br /> <br />2.3 MASONRY BLOCK FILLER: <br /> <br />A. Filler Coat Materials: Provide the manufacturer's recommended factory-formulated, latex-type <br />concrete masonry block fillers that are compatible with the finish materials indicated. <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. High-Performance Latex Block Filler: <br />a. Glidden - “ICI” Bloxfil 4000-1000 Interior/Exterior Heavy Duty Acrylic block filler <br />applied at dry film thickness of not less than 10 to 14 mils or approved equal by BM, <br />PPG, MAB, or SW. <br /> <br /> <br />2.4 PRIMERS <br /> <br />A. Primers: Provide the manufacturer's recommended factory-formulated primers that are compatible <br />with the substrate and finish coats indicated. <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. Gypsum Drywall Primer: White, interior, latex-based primer. <br />a. Glidden - “ICI” 1030-1200 Ultra-hide PVA Primer Sealer. <br />b. Sherwin-Williams - ProMar 200 Latex Wall Primer, B28W8200. <br />c. Approved equal by BM, MAB, PPG. <br />2. Ferrous Metal Primers: Alkyd-type primers. <br />a. Glidden - “ICI” 4160-XXXX Devguard Multi-purpose Primer not less than 2 mil <br />thickness. <br />b. Sherwin-Williams- Pro industrial Pro-Cryl Acrylic Metal Primer, B66-310. <br />c. Approved equal by BM, MAB, PPG. <br />3. Galvanized Metal Primers: <br />a. Glidden - “ICI” 4160-XXXX Devguard Multi-purpose Primer not less than 2 mil <br />thickness. <br />b. Sherwin-Williams- Pro industrial Pro-Cryl Acrylic Metal Primer, B66-310. <br />c. Approved equal by BM, MAB, PPG. <br /> <br /> <br />2.5 UNDERCOAT MATERIALS <br /> <br />A. Undercoat Materials: Provide the manufacturer's recommended factory-formulated undercoat materials <br />that are compatible with the substrate and finish coats indicated. <br />B. Products: Subject to compliance with requirements, provide one of the following: <br />1. Glidden - “ICI” 1120-1200 Ultra-Hide undercoater. <br />2. Sherwin-Williams- Premium Wall & Wood Primer B28W8111. <br />3. Approved equal by BM, MAB, PPG. <br /> <br /> <br />2.6 EXTERIOR FINISH PAINT MATERIAL <br /> <br />A. Finish Paint: Provide the manufacturer's recommended factory-formulated finish-coat materials that <br />are compatible with the substrate and undercoats indicated. <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392