Orange County NC Website
Browse       Search
Orange County Facility Renovations <br />Hillsborough, NC <br /> <br />Smith Sinnett PAINTING <br />2020046/2020047/2020048/2020049/2020055 09 91 00 - 3 <br />3. After finishes are accepted, this room or surface will be used to evaluate coating systems of a <br />similar nature. <br /> <br /> <br />1.4 DELIVERY, STORAGE, AND HANDLING <br /> <br />A. Deliver materials to the job site in the manufacturer's original, unopened packages and containers <br />bearing manufacturer's name and label, and the following information: <br />1. Product name or title of material. <br />2. Product description (generic classification or binder type). <br />3. Manufacturer's stock number and date of manufacture. <br />4. Contents by volume, for pigment and vehicle constituents. <br />5. Thinning instructions. <br />6. Application instructions. <br />7. Color name and number. <br />8. VOC content. <br />B. Store materials not in use in tightly covered containers in a well-ventilated area at a minimum ambient <br />temperature of 45 deg F (7 deg C). Maintain containers used in storage in a clean condition, free of <br />foreign materials and residue. Protect from freezing. Keep storage area neat and orderly. Remove oily <br />rags and waste daily. Take necessary measures to ensure that workers and work areas are protected <br />from fire and health hazards resulting from handling, mixing, and application. <br /> <br /> <br />1.5 PROJECT CONDITIONS <br /> <br />A. Apply water-based paints only when the temperature of surfaces to be painted and surrounding air <br />temperatures are between 50 deg F (10 deg C) and 90 deg F (32 deg C). <br />B. Apply solvent-thinned paints only when the temperature of surfaces to be painted and surrounding air <br />temperatures are between 45 deg F (7 deg C) and 95 deg F (35 deg C). <br />C. Do not apply paint in snow, rain, fog, or mist; or when the relative humidity exceeds 85 percent; or at <br />temperatures less than 5 deg F (3 deg C) above the dew point; or to damp or wet surfaces. <br />1. Painting may continue during inclement weather if surfaces and areas to be painted are <br />enclosed and heated within temperature limits specified by the manufacturer during application <br />and drying periods. <br /> <br />PART 2 - PRODUCTS <br /> <br /> <br />2.1 MANUFACTURERS <br /> <br />A. Manufacturer: Subject to compliance with requirements, provide products of one of the following: <br />1. Benjamin Moore & Co. (BM). <br />2. Glidden-“ICI” Paint Stores, Inc. (ICI), a division of PPG Industries <br />3. M. A. Bruder & Sons, Inc. (MAB). <br />4. PPG Industries, Inc. (PPG). <br />5. Sherwin-Williams Company (SW). <br /> <br /> <br />2.2 PAINT, GENERAL <br /> <br />A. Material Compatibility: Provide block fillers, primers, finish coat materials, and related materials that <br />are compatible with one another and the substrates indicated under conditions of service and <br />application, as demonstrated by the manufacturer based on testing and field experience. <br />B. Material Quality: Provide the manufacturer's best-quality trade sale paint material of the various <br />coating types specified. Paint material containers not displaying manufacturer's product identification <br />will not be acceptable. <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392