Orange County NC Website
Browse       Search
Orange County Facility Renovations <br />Hillsborough, NC <br /> <br />Smith Sinnett PAINTING <br />2020046/2020047/2020048/2020049/2020055 09 91 00 - 1 <br /> <br />SECTION 09 91 00 - PAINTING <br /> <br /> <br />PART 1 - GENERAL <br /> <br /> <br />1.1 SUMMARY <br /> <br />A. This Section includes surface preparation, painting, and finishing of exposed interior and exterior <br />items and surfaces. <br />1. Surface preparation, priming, and finish coats specified in this Section are in addition to shop- <br />priming and surface treatment specified under other Sections. <br />2. Paint exposed surfaces whether or not colors are designated in schedules, except where a <br />surface or material is specifically indicated not to be painted or is to remain natural. Where an <br />item or surface is not specifically mentioned, paint the same as similar adjacent materials or <br />surfaces. If color or finish is not designated, the Architect will select from standard colors or <br />finishes available. <br />a. Painting includes field-painting exposed bare and covered pipes and ducts (including <br />color coding), hangers, exposed steel and iron work, and primed metal surfaces of <br />mechanical and electrical equipment. <br />b. Painting includes all exposed metal excepted as noted by this specification as metal <br />surfaces not to be painted. <br />c. In the event of a conflict between this Section and painting requirements in the <br />Mechanical and Electrical Sections of these specifications, the requirements of this <br />Section shall govern. It is the intention of this specification to ensure that one painting <br />subcontractor will accomplish all exposed painting work in occupied areas of this <br />project. This does not relieve contractors of responsibility for corrective work required <br />by damages to completed or existing work. <br />3. Painting is not required on prefinished items, finished metal surfaces, concealed surfaces, <br />operating parts, and labels. <br />a. Prefinished items not to be painted include the following factory-finished components: <br />1) Acoustical Ceiling Tile <br />2) Plastic toilet enclosures. <br />3) Pre-finished wood doors <br />4) Pre-finished interior architectural woodwork. <br />5) Architectural laminate-clad casework. <br />6) Metal lockers <br />7) Finished mechanical and electrical equipment. <br />8) Light fixtures. <br />9) Switchgear. <br />10) Distribution cabinets. <br />4. Concealed surfaces include walls or ceilings in the following generally inaccessible spaces: <br />a. Foundation spaces. <br />b. Furred areas. <br />c. Ceiling plenums. <br />5. Finished metal surfaces not to be painted include: <br />a. Anodized aluminum. <br />b. Stainless steel. <br />c. Copper. <br />6. Operating parts not to be painted include moving parts of operating equipment, such as the <br />following: <br />a. Valve and damper ope rators. <br />b. Linkages. <br />c. Sensing devices. <br />d. Motor and fan shafts. <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392