Browse
Search
2021-289-AMS-CT Wilson construction-Orange County Renovations
OrangeCountyNC
>
Board of County Commissioners
>
Contracts and Agreements
>
General Contracts and Agreements
>
2020's
>
2021
>
2021-289-AMS-CT Wilson construction-Orange County Renovations
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/2/2021 3:18:56 PM
Creation date
7/2/2021 3:06:31 PM
Metadata
Fields
Template:
Contract
Date
5/19/2021
Contract Starting Date
5/19/2021
Contract Ending Date
5/31/2021
Contract Document Type
Contract
Amount
$740,844.00
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
921
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Orange County Facility Renovations <br />Hillsborough, NC <br />Smith Sinnett ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS <br />2020046/2020047/2020048/2020049/2020055 08 41 13 - 7 <br />3.2 INSTALLATION OF GLAZING <br />A. Install glazing as specified in Section 08 80 00 "Glazing." <br />3.3 INSTALLATION OF ALUMINUM-FRAMED ENTRANCE DOORS <br />A. Install entrance doors to produce smooth operation and tight fit at contact points. <br />1. Exterior Doors: Install to produce weathertight enclosure and tight fit at weather stripping. <br />2. Field-Installed Entrance Door Hardware: Install surface-mounted entrance door hardware <br />according to entrance door hardware manufacturers' written instructions using concealed fasteners <br />to greatest extent possible. <br />3.4 FIELD QUALITY CONTROL <br />A. Testing Agency: Owner will engage a qualified testing agency to perform tests and inspections. <br />B. Field Quality-Control Testing: Perform the following test on mockups. <br />1. Water-Spray Test: Before installation of interior finishes has begun, areas designated by Architect <br />shall be tested according to AAMA 501.2 and shall not evidence water penetration. <br />a. Perform a minimum of two tests in areas as directed by Architect. <br />2. Air Leakage: ASTM E783 at 1.5 times the rate specified for laboratory testing in "Performance <br />Requirements" Article but not more than 0.09 cfm/sq. ft. at a static-air-pressure differential of 1.57 <br />lbf/sq. ft.. <br />a. Perform a minimum of two tests in areas as directed by Architect. <br />3. Water Penetration: ASTM E1105 at a minimum uniform and cyclic static-air-pressure differential <br />of 0.67 times the static-air-pressure differential specified for laboratory testing in "Performance <br />Requirements" Article, but not less than 6.24 lbf/sq. ft., and shall not evidence water penetration. <br />C. Aluminum-framed entrances will be considered defective if they do not pass tests and inspections. <br />D. Prepare test and inspection reports. <br />END OF SECTION <br />DocuSign Envelope ID: 09980A3B-0691-41B4-854D-3865F2287392
The URL can be used to link to this page
Your browser does not support the video tag.