Browse
Search
2020-734-E-AMS-Carolina Contracting and Investments
OrangeCountyNC
>
Board of County Commissioners
>
Contracts and Agreements
>
General Contracts and Agreements
>
2020's
>
2020
>
2020-734-E-AMS-Carolina Contracting and Investments
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/14/2021 11:54:08 AM
Creation date
6/14/2021 11:53:15 AM
Metadata
Fields
Template:
Contract
Date
10/19/2020
Contract Starting Date
10/19/2020
Contract Ending Date
10/20/2020
Contract Document Type
Contract
Amount
$163,952.00
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
52
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
OC DSS -Hillsborough Commons Skylight Replacement Smith Sinnett / 2020054 <br />Hillsborough, NC Orange County <br /> <br />PLASTIC GLAZED SKYLIGHTS 03-2020 08620 curb mounted <br /> 2 <br />1. Continuous Cast Acrylic: <br />a. Self-Ignition Temperature: 833 deg F when tested per ASTM D 1929 on plastic sheets <br />in the thickness intended for use. <br />b. Smoke density of 3.4% when tested per ASTM D 2843 on plastic sheets in the <br />thickness intended for use. <br />c. Relative- Burning Characteristics: As follows, when tested per ASTM D 635: <br />1. Burning rate of 1.019 inches (30 mm) per minute or less when tested with a <br />nominal thickness of 0.118 inches (2.3 mm). <br />2. Impact Modified Resist65 Continuous Cast Acrylic: <br />a. Self-Ignition Temperature: 750 deg F (399 deg C) or greater when tested per ASTM D <br />1929 on plastic sheets in the thickness intended for use. <br />b. Smoke density of 3.8% or less when tested per ASTM D 2843 on plastic sheets in the <br />thickness intended for use. <br />c. Relative- Burning Characteristics: As follows, when tested per ASTM D 635: <br />1. Burning rate of 1.4 inches (36 mm) per minute or less when tested with a <br />nominal thickness of 0.060 inches (1.5 mm). <br />3. Polycarbonate: <br />a. Self-Ignition Temperature: 650 deg F (343 deg C) or greater when tested per ASTM D <br />1929 on plastic sheets in the thickness intended for use. <br />b. Smoke developed index not greater than 450 where tested in the manner intended for <br />use in accordance with ASTM E 84 or UL 723, or a maximum average smoke density <br />rating not greater than 75 where tested in the thickness intended for use in accordance <br />with ASTM D 2843. <br />1. Relative- Burning Characteristics: Burning extent of 1 inch (25mm) or less <br />where tested at a nominal thickness of 0.060 inch (1.5mm), or in the thickness <br />intended for use in accordance with ASTM D 635. <br /> <br />1.5 WARRANTY <br /> <br />A. General: Warranties specified in this section shall not deprive the Owner of other rights the Owner may <br />have under other provisions of the Contract Documents and shall be in addition to and run concurrent with <br />other warranties made by the Contractor under requirements of the Contract Documents. <br />B. Skylight Warranty: Provide written warranty signed by manufacturer, agreeing to repair or replace work <br />that exhibits defects in materials or workmanship and guaranteeing weather-tight and leak-free <br />performance. “Defects” is defined as uncontrolled leakage of water and abnormal aging or deterioration. <br />1. Warranty Period: 5 years from date of Substantial Completion. <br /> <br />C. Plastic Warranty: Provide written warranty signed by manufacturer agreeing to repair or replace work that <br />has or develops defects in the plastic. “Defects” is defined as abnormal aging or deterioration. <br />1. Warranty Period for Acrylic/Polycarbonate: 5 years from date of Substantial Completion against <br />yellowing. <br />D. Finish Warranty: Provide written warranty signed by manufacturer agreeing to repair or replace work with <br />finish defects. “Defects” is defined as peeling, chipping, chalking, fading, abnormal aging or deterioration, <br />and failure to perform as required. <br />1. Warranty Period for Anodized Finish: 1 year from date of Substantial Completion. <br />2. Warranty Period for Powder Coat Finish: 5 years from date of Substantial Completion. <br />3. Warranty Period for Kynar 500 Finish: 5 years from date of Substantial Completion. (10 and 20 <br />years available if specified) <br /> <br /> <br />PART 2- PRODUCTS <br /> <br />2.1 MANUFACTURER <br /> <br />A. Manufacturer: Subject to compliance with requirements, provide products by or equal to: <br />1. Wasco- part of the Velux Group, Wells, ME (800-388-0293). CBSD model, Basis of Design. <br />DocuSign Envelope ID: 51195338-6F17-4D2B-B990-4A82329E7F4E
The URL can be used to link to this page
Your browser does not support the video tag.