Orange County NC Website
Browse       Search
2770 1 ** Fabricate O2 cylinder storage of 2" x 2" angle welded to the floor of the squad bench 684.74 <br />2771 1 (inside storage) & coated with speedliner. There will be (2) seatbelt-style straps to 0.00 <br />2772 1 hold down "D" size cylinders & a "Z" angle installed at the aft end of 2" x 2" angles.0.00 <br />2773 1 ** Install a ProAir 12V A/C kit #80-002-745 917 V w/110 BCM in the L4/1 compartment.7,251.58 <br />2774 1 The kit will consist of an under body condensor with mounting bracket, an air 0.00 <br />2775 1 handler/evaporator with drain pan lines, auxiliary A/C compressor with bracket and 0.00 <br />2776 1 a thermostat to be located in the action area. Install the air return grille/filter on the 0.00 <br />2777 1 curbside wall by the pass thru. Within the A/C system will be a separate hi/lo pressure 0.00 <br />2778 1 protection switch. This system will be for "COOLING ONLY" and the thermostat 0.00 <br />2779 1 will be labeled for this.0.00 <br />2780 1 <br />2782 1 HVAC SYSTEMS: STANDARD SPECIFICATIONS N/C <br />2783 1 <br />2784 1 12 VDC multi-speed exhaust fan at rear of module <br />2785 1 1 static air intake at front curbside of module <br />2786 1 Floor-level return air plenum with replaceable filter for A/C-heat unit <br />2787 1 <br />2788 1 HVAC SYSTEMS: OPTIONS <br />2789 1 <br />2790 (1 )* Relocate the HVAC system from over the R4 to the center of the bulkhead. <br />2791 1 <br />2792 (1 )* Discharge the HVAC system down the length of the patient compartment in 1,023.82 1,023.82 <br />2793 1 the ceiling via the "center trough". <br />2795 1 Ford F-series and Dodge Type I Chassis <br />2804 1 125 / 12 Dual Volt HVAC systems: <br />2805 (1 )* Dual voltage heavy duty combination heater / air conditioner system with <br />2806 1 digital electronic thermostat with digital temperature display WITH dual compressors <br />2807 1 (one 12 VDC OEM chassis compressor and one 125 VAC auxiliary compressor) AND <br />2808 (1 )* 12 VDC Auxiliary A/C condenser mounted under module body. 3,307.24 3,307.24 <br />2818 1 NOTE: 125 VAC CONDENSER IS ALWAYS MOUNTED UNDERBODY. <br />2897 1 <br />2898 1 CUSTOMER NOTES / SPECIAL REQUESTS <br />2899 1 ** Static air intake will be located on streetside of module due to center-mounted HVAC 0.00 <br />2900 1 ** REF. Line 2805: For the dual volt, install the control box on the upper back wall in the 166.25 <br />2901 1 air flow space above the Mermaid system. ILO standard #105 condenser, install 2-fan 0.00 <br />2902 1 #109 flat-mount condenser, #50-001-601, under the module for the 110 compressor. 0.00 <br />2903 1 The 3-fan condenser for the 12VDC compressor will be installed on front of the module.0.00 <br />2904 1 ** Fabricate and install a bare aluminum bracket around the underbody condenser to 232.68 <br />2905 1 further secure and protect the condenser.0.00 <br />2908 1 <br />2910 1 FIRE EXTINGUISHER: OPTIONS <br />2911 1 <br />2912 (2 ) 5# ABC fire extinguishers N/C <br />2914 1 * Extinguisher mounting instructions:Ship Loose <br />2916 1 <br />2918 1 LOOSE EQUIPMENT to be provided by Excellance <br />2919 1 Price: <br />2920 1 ** Supply (4) Bowman #GB-003 glove box holders.431.25 <br />2995 1 <br />2996 1 CUSTOMER SUPPLIED PARTS <br />2997 1 <br />2998 1 It is Excellance policy for all parts to be supplied by Excellance. The reasons for this policy <br />2999 1 are to allow Excellance: (1) to better engineer and manufacture the vehicle by obtaining the <br />3000 1 parts in advance, (2) provide better control over tracking the delivery of all parts and getting the <br />3001 1 part to the correct vehicle for which it is intended, and (3) it allows Excellance to better adhere to <br />3002 1 its production schedule. Disruptions in our production schedule are very costly and wasteful in <br />3003 1 terms of labor. Therefore, exceptions to this policy will result in a charge of $250.00 per part <br />3004 1 supplied by any dealer or customer PLUS the appropriate labor charge for installing any such part. <br />3005 Note: Excellance does not warrant the installation of customer supplied parts installed by Excellance! <br />3006 1 Excellance waives the $250 "parts charge" for two-way radio equipment, radio antenna, and cots. <br />3007 1 <br />3050 1 <br />3051 1 Payment Terms: <br />AQ Version 19.1 Page 14 of 16 8/24/2020 2:28 PM <br />DocuSign Envelope ID: 611A911C-6F59-40BA-A31F-AF9027EEB611