Orange County NC Website
Browse       Search
DocuSign Envelope ID:35B29A4C-EA5E-4F1C-9C55-5AB9721304BD 0 <br /> o Using a harrow or similar equipment, rake the existing gravel to remove root wads <br /> and organic debris <br /> o Remove all existing cross ties and rebar anchor rods <br /> • Grading <br /> o North of the existing gravel lot, site grades will need to be raised from 4-inches to <br /> 24-inches <br /> o Fill material should be placed on a geotextile for stabilization,such a a Mirafi 500X, <br /> or equivalent <br /> o Fill material should consist of compacted ABC stone <br /> o Low spots on the western side should be filled with compacted ABC stone <br /> o Recompact existing gravel <br /> o Dress out entire area with 3-inches of#57 stone <br /> • Ditch <br /> o Remove electrical stub up outlet <br /> o Clean out and grade to promote steady drainage <br /> o Seed, fertilize and lime <br /> o Install turf starter erosion control fabric such as Curlex Quick Grass Pro <br /> o Install a Type IV (6-inch) erosion control log every 50-feet <br /> If you have any questions regarding the recommended upfit scope for the Motor Pool gravel <br /> parking lot,please contact our office at 919 732-3883. <br /> Prepared by, <br /> �1 <br /> Don Dewey, PE <br /> Senior Geotechnical Engineer <br />