2021-205-E-Solid Waste-Full Circle Environmental-Walnut Grove Wastewater Disposal System

Browse Search

DocuSign Envelope ID:81 E05E8E-EED7-43D3-8B8A-0811 OE72140A SECTION 33 34 00 - FORCE MAINS THE OWNER and the logs neatly stacked on the edge of the right-of-way or disposed of in a manner approved by the Engineer. D. Brush, laps, roots, etc., shall be disposed off-site in a manner approved by the Engineer. Burning of trees, brush and debris will not be permitted. E. Grubbing of stumps that are in the way of construction shall be done in any convenient manner which will not cause damage to remaining trees or adjacent property. Stumps shall be disposed as for brush or laps above. F. Limits of the pipe-laying operation shall be confined to the right-of-way and easements. The width of clearing shall be held to a minimum and in no case wider than the right-of- way or easement. 4.3 WORK ON HIGHWAY RIGHT-OF-WAY A. The Contractor shall not begin work on any property of the Department of Transportation until he has secured necessary permits and obtained a copy of the R.O.W. encroachment contract from the Owner. He shall conform to all requirements of the Department of Transportation; or its authorized representative in the prosecution of this portion of the work. It shall be the responsibility of each Bidder to contact the local DOT representative and to determine the exact requirements for work to be done. Requirements shall include, but are not limited to the following: B. Where a pipeline crosses under a highway, it shall be installed either by open cut in tunnel or in encasement under the highway. Materials and method of crossing shall be as indicated on the plans for each crossing. Where pipe is installed by open cut at least one full lane for traffic shall be kept open and clear at all times. C. The Contractor shall provide full-time flagmen, with appropriate red flags, at all times when work is in progress along highways. D. Necessary warning and descriptive signs shall be provided and placed at each end of the working area while work is in progress along highways. These signs shall be well tended and shall be placed at sufficient distances from the site of the work so that ample warning is given to approaching traffic. Signs shall be adequately lighted at night and meet Department of Transportation requirements. E. The Contractor shall keep all streets open to traffic at all times unless permitted otherwise by the Engineer or Department of Transportation as applicable. The Contractor shall provide, place, and maintain temporary traffic control devices as directed by the Engineer or Department of Transportation. The latest edition of the Manual on Uniform Traffic Control Devices for Streets and Highways as prepared by the National Joint Committee on Uniform Traffic Control Devices shall be used as a guide in the placement of devices and all devices shall meet the requirements of said manual. The removal of road signs shall be done in accordance with and subject to the approval of the North Carolina Department of Transportation. Temporary signs shall be furnished and installed by the Contractor as necessary and as required. All Regulatory Signs shall be replaced immediately following backfilling or at the end of each day, whichever occurs first. F. Where pipe is installed in open cut across a highway, the cut shall be immediately backfilled and all work of repairing the pavement completed immediately. Any subsequent settlement shall be immediately corrected and repaired. G. Where pavement is cut and replaced, the Contractor shall cut the edges to a straight and even line before repairing the pavement. No ragged edges will be allowed or accepted. Orange County DAA PN R00592-225N2 Walnut Grove Wastewater System January, 2021 33 34 00-10