Orange County NC Website
Browse       Search
Article 5: Uses 243 <br /> Section 5.16: Standards for Automotive/Transportation Related Uses <br /> (e) Manufacturing, Assembly, Processing, and Distribution Uses—Other, <br /> limited to Printing & Lithography <br /> (2) Multiple Uses, identified in Section 5.15.3(A)(1), are permitted only in accordance <br /> with the following standards: <br /> (a) The site plan shall identify the square footage of each structure by type <br /> of use. <br /> (b) The Principal Use type of Research Facility With Manufacturing must be <br /> established on the site. <br /> (c) The Multiple Use shall not exceed 25% of the total square footage of all <br /> structures on the site. <br /> 5.15.4 Sawmills <br /> (A) Use Standards <br /> (1) Use shall not be. permitted within the Rural Buffer land use classification, as <br /> designated by the adopted Comprehensive Plan, as part of a Conditional District <br /> application.'z <br /> (a) Permittedas a Conditional Use District. Refer to Section 5.13 of this <br /> Ordinance; or <br /> !hamPermitted within the Rural Buffer land use classification, as designated <br /> by the adopter! GemnrohonoiVe Plan art of a CE)R Jiti.,nol7".,niR <br /> niotrint a nlioation <br /> (B) Standards of Evaluation <br /> (1) Minimum lot size: 5 acres. <br /> (2) All structures, equipment, and storage shall be located a minimum of 100 feet <br /> from the property line. <br /> (3) Hours of operation shall be limited to the hours between 7 a.m. and 7 p.m. <br /> (4) Site shall have direct access to a major road, as classified in the Orange County <br /> Comprehensive Plan, and shall use said road as the primary access, unless <br /> approved otherwise in the permit or conditions of approval, as applicable. <br /> SECTION • ' AUTOMOTIVE/TRANSPORTATIO <br /> USES <br /> 5.16.1 Airports, General Aviation, Heliports, STOL <br /> (A)Use Standards <br /> /4 ShallFrl not be perrntted_ao Conditional Use District. Refer to Section_5.1, f this <br /> Ordinance. <br /> (13)(A) Submittal Requirements and Standards of Evaluation for Class a Special Use <br /> PermitNR-CD District <br /> (1) Submittal Requirements <br /> In addition to the information required in Ssection 2.79, the following shall be <br /> submitted as part of the application: <br /> (a) A configuration diagram depicting the layout of runways, taxiways, <br /> approach zones and overrun areas. These diagrams should also be on <br /> aerial photographs that show the area within five miles of the proposed <br /> site. <br /> 123 Existing restriction being relocated since there is no longer an (a)and (b) in the subsection. <br /> Orange County, North Carolina—Unified Development Ordinance Page 5-122 <br />