Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 3. 5-1/2 inches thick with a thermal resistance of 19 deg F x h x sq. ft./Btu at 75 deg F 6-1/2 <br /> inches thick with a thermal resistance of 21 deg F x h x sq. ft./Btu at 75 deg F [9-1/2 <br /> inches, 10 inches , 10-1/4 inches thick with a thermal resistance of 30 deg F x h x sq. <br /> ft./Btu at 75 deg F. <br /> 2.7 AUXILIARY INSULATING MATERIALS <br /> D. Tape: Pressure-sensitive tape of type recommended by insulation manufacturer for sealing <br /> joints and penetrations. <br /> E. Adhesive for Bonding Insulation: Product with demonstrated capability to bond insulation <br /> securely to substrates indicated without damaging insulation and substrates. <br /> 2.4 INSULATION FASTENERS <br /> A. Adhesively Attached, Spindle-Type Anchors: Plate welded to projecting spindle; capable of <br /> holding insulation of thickness indicated securely in position indicated with self-locking washer <br /> in place; and complying with the following requirements: <br /> 1. Products: <br /> a. AGM Industries,Inc.; Series T TACTOO Insul-Hangers. <br /> b. Eckel Industries of Canada; Stic-Klip Type N Fasteners. <br /> C. Gemco; Spindle Type. <br /> 2. Plate: Perforated galvanized carbon-steel sheet, 0.030 inch,thick by 2 inches square. <br /> 3. Spindle: Copper-coated, low carbon steel; fully annealed; 0.105 inch (2.67 mm) in <br /> diameter; length to suit depth of insulation indicated. <br /> B. Adhesively Attached, Angle-Shaped, Spindle-Type Anchors: Angle welded to projecting <br /> spindle; capable of holding insulation of thickness indicated securely in position indicated with <br /> self-locking washer in place; and complying with the following requirements: <br /> 1. Products: <br /> a. Gemco; 90-Degree Insulation Hangers. <br /> 2. Angle: Formed from 0.030-inch- thick, perforated, galvanized carbon-steel sheet with <br /> each leg 2 inches square. <br /> 3. Spindle: Copper-coated, low carbon steel; fully annealed; 0.105 inch in diameter; length <br /> to suit depth of insulation indicated. <br /> C. Insulation-Retaining Washers: Self-locking washers formed from 0.016-inch- thick galvanized <br /> steel sheet, with beveled edge for increased stiffness, sized as required to hold insulation <br /> securely in place,but not less than 1-1/2 inches square or in diameter. <br /> 1. Products: <br /> THERMAL INSULATION 072100 -4 <br />