Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 1.5 SUBMITTALS <br /> A. Product Data: For each type of product indicated. <br /> B. Samples for Verification: Full-size units for each type of exposed insulation indicated. <br /> C. Product Test Reports: Based on evaluation of comprehensive tests performed by a qualified <br /> testing agency for insulation products. <br /> D. Research/Evaluation Reports: For foam-plastic insulation. <br /> 1.6 QUALITY ASSURANCE <br /> A. Source Limitations: Obtain each type of building insulation through one source from a single <br /> manufacturer. <br /> B. Fire-Test-Response Characteristics: Provide insulation and related materials with the fire-test- <br /> response characteristics indicated, as determined by testing identical products per test method <br /> indicated below by UL or another testing and inspecting agency acceptable to authorities having <br /> jurisdiction. Identify materials with appropriate markings of applicable testing and inspecting <br /> agency. <br /> 1. Surface-Burning Characteristics: ASTM E 84. <br /> 2. Fire-Resistance Ratings: ASTM E 119. <br /> 3. Combustion Characteristics: ASTM E 136. <br /> C. Recycled Content: Provide glass-fiber insulation with recycled content so postconsumer <br /> recycled content plus one-half of Post consumer recycled content is not less than 60 percent. <br /> 1.7 DELIVERY, STORAGE,AND HANDLING <br /> A. Protect insulation materials from physical damage and from deterioration by moisture, soiling, <br /> and other sources. Store inside and in a dry location. Comply with manufacturer's written <br /> instructions for handling, storing, and protecting during installation. <br /> B. Protect plastic insulation as follows: <br /> 1. Do not expose to sunlight, except to extent necessary for period of installation and <br /> concealment. <br /> 2. Protect against ignition at all times. Do not deliver plastic insulating materials to Project <br /> site before installation time. <br /> 3. Complete installation and concealment of plastic materials as rapidly as possible in each <br /> area of construction. <br /> THERMAL INSULATION 072100 -2 <br />