Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> walls and elsewhere as required for corrosion resistance. Provide toothed-steel or lead expansion <br /> sleeves for drilled-in-place anchors. <br /> C. Adhesives, General: Do not use adhesives that contain urea formaldehyde. <br /> D. VOC Limits for Installation Adhesives and Glues: Use installation adhesives that comply with the <br /> following limits for VOC content when calculated according to 40 CFR 59, Subpart D (EPA <br /> Method 24): <br /> 1. Wood Glues: 30 g/L. <br /> 2. Contact Adhesive: 250 g/L. <br /> E. Adhesive for Bonding Plastic Laminate: woodworkers option <br /> 3. Adhesive for Bonding Edges: Hot-melt adhesive <br /> 2.4 FABRICATION, GENERAL <br /> A. Interior Woodwork Grade: Unless otherwise indicated,provide Premium-grade interior woodwork <br /> complying with referenced quality standard. <br /> B. Wood Moisture Content: Comply with requirements of referenced quality standard for wood <br /> moisture content in relation to ambient relative humidity during fabrication and in installation <br /> areas. <br /> C. Sand fire-retardant-treated wood lightly to remove raised grain on exposed surfaces before <br /> fabrication. <br /> D. Fabricate woodwork to dimensions, profiles, and details indicated. Ease edges to radius indicated <br /> for the following: <br /> 1. Corners of Cabinets and Edges of Solid-Wood (Lumber) Members and Rails: 1/16 inch <br /> (1.5 mm). <br /> E. Complete fabrication, including assembly finishing, and hardware application, to maximum extent <br /> possible before shipment to Project site. Disassemble components only as necessary for <br /> shipment and installation. Where necessary for fitting at site, provide ample allowance for <br /> scribing,trimming, and fitting. <br /> 1. Notify ID seven days in advance of the dates and times woodwork fabrication will be <br /> complete. <br /> F. Shop-cut openings to maximum extent possible to receive hardware, appliances,plumbing fixtures, <br /> electrical work, and similar items. Locate openings accurately and use templates or roughing-in <br /> diagrams to produce accurately sized and shaped openings. Sand edges of cutouts to remove <br /> splinters and burrs. <br /> 1. Seal edges of openings in countertops with a coat of varnish. <br /> G. Install glass to comply with applicable requirements in Division 08 Section "Glazing" and in <br /> GANA's "Glazing Manual." For glass in wood frames, secure glass with removable stops. <br /> INTERIOR ARCHITECTURAL WOODWORK 064023 - 7 <br />