Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> Shop Drawings. Coordinate fabrication schedule with construction progress to avoid delaying <br /> the Work. <br /> 1. Locate concealed framing, blocking, and reinforcements that support woodwork by field <br /> measurements before being enclosed,and indicate measurements on Shop Drawings. <br /> 2. Established Dimensions: Where field measurements cannot be made without delaying <br /> the Work, establish dimensions and proceed with fabricating woodwork without field <br /> measurements. Provide allowance for trimming at site, and coordinate construction to <br /> ensure that actual dimensions correspond to established dimensions. <br /> 1.8 COORDINATION <br /> A. Coordinate sizes and locations of framing,blocking, furring,reinforcements, and other related units <br /> of Work specified in other Sections to ensure that interior architectural woodwork can be <br /> supported and installed as indicated. <br /> B. Hardware Coordination: Distribute copies of approved hardware schedule specified in Division 08 <br /> Section "Door Hardware (Scheduled by Describing Products)" to fabricator of architectural <br /> woodwork; coordinate Shop Drawings and fabrication with hardware requirements. <br /> PART 2 -PRODUCTS <br /> 2.1 WOODWORK FABRICATORS <br /> A. Available Fabricators: Subject to compliance with requirements, fabricators offering interior <br /> architectural woodwork that may be incorporated into the Work include, but are not limited to, <br /> the following: <br /> 1) Bertch Cabinets <br /> 2) Executive Kitchens <br /> 3) CKS <br /> 4) Ultracraft <br /> 5) Cleora Sterling <br /> 6) Aventine <br /> 7) MarKraft Cabinets <br /> 2.2 MATERIALS <br /> A. General: Provide materials that comply with requirements of AWI's quality standard for each type <br /> of woodwork and quality grade specified,unless otherwise indicated. <br /> B. Wood Species and Cut for Transparent Finish: American Cherry, plain sawn, Maple, plain sawn, <br /> Bamboo 3 ply <br /> C. Wood Species for Opaque Finish: Any closed-grain hardwood, Eastern white pine <br /> D. Wood Products: Comply with the following: <br /> INTERIOR ARCHITECTURAL WOODWORK 064023 -4 <br />