Orange County NC Website
Browse       Search
DocuSign Envelope ID: D561BlAE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 06100-00 ROUGH CARPENTRY <br /> 06100-01 RELATED DOCUMENTS <br /> 1 Drawings and General Provisions of Contract, including General and Supplementary <br /> Conditions and Division 1 Specifications Sections, apply to work of this section. <br /> 2 Specified publications refer to the most recent edition. <br /> 06100-02 DESCRIPTION OF WORK <br /> 1 Furnish and install structural and framing work as indicated on the drawings, schedules <br /> and as specified. <br /> 2 Provide supplementary items, appurtenances and devices incidental to or necessary for a <br /> secure, sound and complete installation. <br /> 3 See Division 7 for insulated sheathing. <br /> 4 Rough hardware to comply with N.C.State Building Code requirements for fasteners. <br /> 5 Finish carpentry is specified in Section 06400. <br /> 06100-03 QUALITY ASSURANCE <br /> 1 The quality and design of wood members,their sizing and their fastenings are to be <br /> governed by Chapter 23,Wood Construction, 2018 Edition of the North Carolina State <br /> Building Code,unless otherwise specifically noted in these specifications or on the <br /> working drawings. <br /> 2 Each piece of structural framing lumber and plywood shall bear the grade and trademark <br /> of the association under whose rules it was produced and bear a mill identification mark. <br /> Comply with PS 20. <br /> 06100-04 PRODUCTS <br /> 1 Deliver and store materials in dry areas. Protect materials against exposure to weather <br /> and contact with damp or wet surfaces. Stack lumber and plywood off the ground and in <br /> a manner that will provide air circulation through the stacks <br /> 2 Studs,headers, and other structural framing shall be West Coast Spruce. <br /> 06100-Carpentry-1 <br />