Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 2.6 ACRYLIC SHEET FINISHES <br /> A. Colored Coatings for Acrylic Sheet: For copy and background colors, provide colored <br /> coatings, including inks, dyes, and paints, that are recommended by acrylic manufacturers for <br /> optimum adherence to acrylic surface and that are UV and water resistant for five years for <br /> application intended. <br /> PART 3 -EXECUTION <br /> 3.1 EXAMINATION <br /> A. Examine substrates, areas, and conditions, with Installer present, for compliance with <br /> requirements for installation tolerances and other conditions affecting performance of work. <br /> B. Verify that items,including anchor inserts, are sized and located to accommodate signs. <br /> C. Proceed with installation only after unsatisfactory conditions have been corrected. <br /> 3.2 INSTALLATION <br /> A. Locate signs and accessories where indicated, using mounting methods of types described and <br /> complying with manufacturer's written instructions. <br /> 1. Install signs level, plumb, and at heights indicated, with sign surfaces free of distortion <br /> and other defects in appearance. <br /> 2. Interior Wall Signs: Install signs on walls adjacent to latch side of door where applicable. <br /> Where not indicated or possible, such as double doors, install signs on nearest adjacent <br /> walls. Locate to allow approach within 3 inches (75 mm) of sign without encountering <br /> protruding objects or standing within swing of door. <br /> B. Wall-Mounted Signs: Comply with sign manufacturer's written instructions except where more <br /> stringent requirements apply. <br /> 1. Two-Face Tape: Mount signs to smooth,nonporous surfaces. Do not use this method for <br /> vinyl-covered or rough surfaces. <br /> 2. Hook-and-Loop Tapes: Mount signs to smooth,nonporous surfaces. <br /> 3. Magnetic Tape: Mount signs to smooth,nonporous surfaces. <br /> 4. Silicone-Adhesive Mounting: Attach signs to irregular, porous, or vinyl-covered <br /> surfaces. <br /> 5. Shim Plate Mounting: Provide 1/8-inch- (3-mm-)thick, concealed aluminum shim plates <br /> with predrilled and countersunk holes, at locations indicated, and where other mounting <br /> methods are not practicable. Attach plate with fasteners and anchors suitable for secure <br /> attachment to substrate. Attach panel signs to plate using method specified above. <br /> 6. Mechanical Fasteners: Use nonremovable mechanical fasteners placed through predrilled <br /> holes. Attach signs with fasteners and anchors suitable for secure attachment to substrate <br /> as recommended in writing by sign manufacturer. <br /> 7. Signs Mounted on Glass: Provide matching opaque plate on opposite side of glass to <br /> conceal mounting materials. <br /> SIGNAGE 101400 - 5 <br />