Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 1. Remove incompatible primers and reprime substrate with compatible primers as required <br /> to produce paint systems indicated. <br /> D. Concrete Substrates: Remove release agents, curing compounds, efflorescence, and chalk. Do <br /> not paint surfaces if moisture content or alkalinity of surfaces to be painted exceeds that <br /> permitted in manufacturer's written instructions. <br /> E. Clay Masonry Substrates: Remove efflorescence and chalk. Do not paint surfaces if moisture <br /> content of surfaces or alkalinity of mortar joints to be painted exceed that permitted in <br /> manufacturer's written instructions. <br /> F. Concrete Masonry Substrates: Remove efflorescence and chalk. Do not paint surfaces if <br /> moisture content or alkalinity of surfaces to be painted exceeds that permitted in manufacturer's <br /> written instructions. <br /> G. Steel Substrates: Remove rust and loose mill scale. Clean using methods recommended in <br /> writing by paint manufacturer. <br /> H. Galvanized-Metal Substrates: Remove grease and oil residue from galvanized sheet metal <br /> fabricated from coil stock by mechanical methods to produce clean, lightly etched surfaces that <br /> promote adhesion of subsequently applied paints. <br /> I. Aluminum Substrates: Remove surface oxidation. <br /> J. Wood Substrates: <br /> 1. Scrape and clean knots, and apply coat of knot sealer before applying primer. <br /> 2. Sand surfaces that will be exposed to view, and dust off. <br /> 3. Prime edges, ends, faces,undersides, and backsides of wood. <br /> 4. After priming, fill holes and imperfections in the finish surfaces with putty or plastic <br /> wood filler. Sand smooth when dried. <br /> K. Gypsum Board Substrates: Do not begin paint application until finishing compound is dry and <br /> sanded smooth. <br /> L. Plaster Substrates: Do not begin paint application until plaster is fully cured and dry. <br /> M. Cotton or Canvas Insulation Covering Substrates: Remove dust, dirt, and other foreign material <br /> that might impair bond of paints to substrates. <br /> 3.3 APPLICATION <br /> A. Apply paints according to manufacturer's written instructions. <br /> 1. Use applicators and techniques suited for paint and substrate indicated. <br /> 2. Paint surfaces behind movable equipment and furniture same as similar exposed surfaces. <br /> Before final installation, paint surfaces behind permanently fixed equipment or furniture <br /> with prime coat only. <br /> 3. Paint front and backsides of access panels, removable or hinged covers, and similar <br /> hinged items to match exposed surfaces. <br /> INTERIOR PAINTING 099123 - 6 <br />