Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 2. Environmental Performance Rating: EPR 2. <br /> D. Epoxy Wall Paint(satin): To be used at all exposed interior block locations. <br /> 1. Dur A Wall VC manufactured by Dur-A-Flex <br /> 2. 4 different colors may be chosen for different areas. <br /> PART 3 -EXECUTION <br /> 3.1 EXAMINATION <br /> A. Examine substrates and conditions, with Applicator present, for compliance with requirements <br /> for maximum moisture content and other conditions affecting performance of work. <br /> B. Maximum Moisture Content of Substrates: When measured with an electronic moisture meter <br /> as follows: <br /> 1. Concrete: 12 percent. <br /> 2. Masonry(Clay and CMU): 12 percent. <br /> 3. Wood: 15 percent. <br /> 4. Gypsum Board: 12 percent. <br /> 5. Plaster: 12 percent. <br /> C. Verify suitability of substrates, including surface conditions and compatibility with existing <br /> finishes and primers. <br /> D. Begin coating application only after unsatisfactory conditions have been corrected and surfaces <br /> are dry. <br /> 1. Beginning coating application constitutes Contractor's acceptance of substrates and <br /> conditions. <br /> 3.2 PREPARATION <br /> A. Comply with manufacturer's written instructions and recommendations in "MPI Architectural <br /> Painting Specification Manual" applicable to substrates indicated. <br /> B. Remove plates, machined surfaces, and similar items already in place that are not to be painted. <br /> If removal is impractical or impossible because of size or weight of item, provide surface- <br /> applied protection before surface preparation and painting. <br /> 1. After completing painting operations, use workers skilled in the trades involved to <br /> reinstall items that were removed. Remove surface-applied protection if any. <br /> 2. Do not paint over labels of independent testing agencies or equipment name, <br /> identification,performance rating, or nomenclature plates. <br /> C. Clean substrates of substances that could impair bond of paints, including dirt, oil, grease, and <br /> incompatible paints and encapsulants. <br /> INTERIOR PAINTING 099123 - 5 <br />