Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> B. Manufacturers: Subject to compliance with requirements, provide products by one of the <br /> following: <br /> 1. Benjamin Moore&Co. <br /> 2. Pittsburg Paints <br /> 3. Sherwin—Williams Company <br /> 4. Duron,Inc. <br /> 5. ICI Paints. <br /> 6. Porter Paints. <br /> 7. PPG Architectural Finishes,Inc. <br /> 8. Dur A Wall <br /> 2.2 PAINT, GENERAL <br /> A. Material Compatibility: <br /> 1. Provide materials for use within each paint system that are compatible with one another <br /> and substrates indicated, under conditions of service and application as demonstrated by <br /> manufacturer,based on testing and field experience. <br /> 2. For each coat in a paint system, provide products recommended in writing by <br /> manufacturers of topcoat for use in paint system and on substrate indicated. <br /> B. VOC Content of Field-Applied Interior Paints and Coatings: Provide products that comply with <br /> the following limits for VOC content, exclusive of colorants added to a tint base, when <br /> calculated according to 40 CFR 59, Subpart D (EPA Method 24); these requirements do not <br /> apply to paints and coatings that are applied in a fabrication or finishing shop: <br /> 1. Flat Paints, Coatings, and Primers: VOC content of not more than 50 g/L. <br /> 2. Nonflat Paints, Coatings, and Primers: VOC content of not more than 150 g/L. <br /> 3. Anti-Corrosive and Anti-Rust Paints Applied to Ferrous Metals: VOC not more than 250 <br /> g/L. <br /> 4. Floor Coatings: VOC not more than 100 g/L. <br /> 5. Shellacs, Clear: VOC not more than 730 g/L. <br /> 6. Shellacs,Pigmented: VOC not more than 550 g/L. <br /> 7. Flat Topcoat Paints: VOC content of not more than 50 g/L. <br /> 8. Nonflat Topcoat Paints: VOC content of not more than 150 g/L. <br /> 9. Anti-Corrosive and Anti-Rust Paints Applied to Ferrous Metals: VOC not more than 250 <br /> g/L. <br /> 10. Floor Coatings: VOC not more than 100 g/L. <br /> C. Colors: As selected by Architect and Designer from manufacturer's full range i <br /> 2.3 BLOCK FILLERS. <br /> A. Interior/Exterior Latex Block Filler: MPI#4. <br /> 1. VOC Content: E Range of E2. <br /> INTERIOR PAINTING 099123 - 3 <br />